Fairchild BC557BTA Transistor: Description, Replacement and Features

Fairchild BC557BTA Transistor: Description, Replacement and Features
Post Date:2024-11-21,

What is Fairchild BC557BTA?

The Fairchild BC557BTA is a widely recognized PNP transistor, specifically designed for low-power applications. As part of the BC557 family, it is known for its reliable performance in switching and amplification circuits. This transistor operates in the active region, meaning it functions well in small signal operations where precision is crucial.

Fairchild BC557BTA Transistor: Description, Replacement and Features

One of the main advantages of this transistor is its ability to amplify weak electrical signals efficiently. It achieves this while maintaining minimal energy consumption, making it suitable for battery-powered devices. Additionally, the BC557BTA’s compact design allows it to integrate seamlessly into densely packed circuit boards. Its flexibility ensures compatibility with a variety of electronic designs, ranging from analog circuits to digital signal processing.


Fairchild BC557BTA Specifications

Manufacturer: Onsemi

Product Category: Bipolar Transistors - BJT

RoHS: YES

Technology: Si

Mounting Style: Through Hole

Package / Case: TO-92-3 Kinked Lead

Transistor Polarity: PNP

Configuration: Single

Maximum DC Collector Current: 100 mA

Collector- Emitter Voltage VCEO Max: 45 V

Collector- Base Voltage VCBO: 50 V

Emitter- Base Voltage VEBO: 5 V

Collector-Emitter Saturation Voltage: 250 mV

Pd - Power Dissipation: 500 mW

Gain Bandwidth Product fT: 150 MHz

Maximum Operating Temperature: + 150 C

Series: BC557

Packaging: Ammo Pack

Brand: Onsemi / Fairchild

Continuous Collector Current: - 100 mA

Height: 5.33 mm

Length: 5.2 mm

Width:    4.19 mm

Product Type: BJTs - Bipolar Transistors

Subcategory:  Transistors

Unit Weight:  0.008466 oz


Fairchild BC557BTA Physical Characteristics

Package Type: TO-92 (Epoxy Plastic)

Number of Pins: Three (Emitter, Base, Collector)

Pin Arrangement: Linear (Emitter, Base, Collector from left to right with flat side facing you)

Thermal Resistance: Low thermal resistance for better heat dissipation

Marking: Clear identification of model and batch number on the flat surface


Fairchild BC557BTA Features

The features of the Fairchild BC557BTA set it apart from similar transistors in the market:


  • Low Noise Performance: This ensures clear signal transmission, particularly important in audio and communication circuits.
  • Wide Operating Temperature Range: It operates effectively between -55°C to 150°C, making it suitable for extreme environments.
  • High Current Gain: The current gain ranges from 110 to 800, ensuring efficient signal amplification.
  • Compact Package: Its small TO-92 package minimizes the space required on circuit boards.
  • Energy Efficient: Low power consumption enhances battery life in portable devices.


Each of these features adds value, ensuring reliable and consistent performance across applications. Its low noise capability, for instance, is particularly appreciated in audio systems, where signal clarity is essential.


Fairchild BC557BTA Pinout

Fairchild BC5578BTA has three pins. The three-pin configuration consists of:


  • Emitter (E): This is the first pin, connected to the circuit’s ground or negative supply in most configurations.
  • Base (B): The middle pin acts as the control input. A small current at the base allows a larger current to flow between the collector and emitter.
  • Collector (C): The third pin is responsible for delivering the output current.


Fairchild BC557BTA Transistor: Description, Replacement and Features

With the flat side of the transistor facing you, the pins are arranged in this order: emitter, base, and collector. This simple layout minimizes errors during circuit assembly and makes the transistor easy to use.


How Does the BC557BTA Transistor Work?

The BC557BTA is a PNP bipolar junction transistor (BJT) that operates by controlling the flow of current between the emitter and collector terminals using a small current at the base terminal. Here's how it functions:


Biasing:


  • To turn the transistor on, the base-emitter junction must be forward-biased. This means the base should be slightly negative with respect to the emitter.
  • A small current flows into the base terminal, allowing a much larger current to flow from the emitter to the collector.



Regions of Operation:


  • Cut-off Region: When no base current flows, the transistor remains off. No current flows from emitter to collector.
  • Active Region: The transistor amplifies the base current. A small base current results in a proportional, larger collector-emitter current.
  • Saturation Region: The transistor is fully on, allowing maximum current flow from emitter to collector.



Amplification and Switching:


  • In amplification, the BC557BTA increases the base signal strength.
  • In switching, it works like a controlled switch, toggling the collector-emitter connection based on base input.



Voltage Polarities:


  • The collector is more negative than the emitter.
  • The base is slightly negative compared to the emitter to control the flow.



How to Use the BC557BTA on a Circuit Board?

To use the BC557BTA effectively in a circuit, follow these steps:

1. Identify the Pinout:

The BC557BTA has three pins: Emitter (E), Base (B), and Collector (C). When the flat side faces you:

The left pin is the Emitter.

The middle pin is the Base.

The right pin is the Collector.


2. Choose the Mode of Operation:

For switching applications, connect the base to the control signal through a resistor, and connect the collector to the load.

For amplification, bias the base with a small current and apply the input signal to amplify.


3. Add Resistors:

Include a base resistor to limit the base current and prevent damage. The resistor value can be calculated as:

Fairchild BC557BTA Transistor: Description, Replacement and Features

Where VIN is the input voltage, VBE is typically 0.7V, and IB is the desired base current.


4. Connect the Circuit:


  • Connect the emitter to the negative side of the power source.
  • Connect the collector to the load, and the load to the positive side of the power source.
  • Connect the base to the input signal through the base resistor.



5. Test the Circuit:

Power the circuit and check the voltage and current at each terminal to ensure proper operation.


6. Application Example:

Switching Circuit Example:

Use the BC557BTA to control an LED. Connect the collector to the LED’s cathode, and the LED’s anode to a power source. The emitter is grounded. Apply a base signal to turn the LED on or off.

Amplifier Circuit Example:

Use it to amplify a small microphone signal. Connect the input signal to the base through a resistor and couple the amplified output from the collector to the next stage.


Fairchild BC557BTA Applications

The BC557BTA is a widely used component used in various applications due to its reliable performance:


  • Audio Amplifiers: It enhances weak audio signals, delivering clear and amplified output.
  • Switching Circuits: This transistor operates efficiently as an electronic switch in low-power systems.
  • Analog Signal Processing: It works well in circuits that require precise analog computations, such as operational amplifiers.
  • Voltage Regulation: In power supply circuits, it helps maintain stable voltage levels.
  • Communication Devices: Its low noise and high-frequency capabilities make it suitable for RF circuits and communication systems.



Fairchild BC557BTA Dimensions

The physical dimensions of the TO-92 package are as follows:

Fairchild BC557BTA Transistor: Description, Replacement and Features

These dimensions highlight the transistor's small size, which is a key advantage in modern electronics where space is limited.


BC557BTA Replacement

There are scenarios where finding an exact BC557BTA may not be possible. In such cases, the following replacements can be considered:

Part Number

Type

Voltage (VCEO)

Current (IC)

Gain (hFE)

BC558

PNP

-45V

-100mA

110–800

BC559

PNP

-45V

-100mA

125–450

2N2907

PNP

-60V

-600mA

100–300

S9012

PNP

-40V

-500mA

120–400

2SA1015

PNP

-50V

-150mA

70–700

In summary:

BC558: A similar PNP transistor with matching electrical parameters.

BC559: Offers slightly better noise performance for sensitive circuits.

2N2907: A robust PNP transistor, though slightly larger, suitable for most applications.

S9012: Another PNP option with comparable characteristics.

2SA1015: Widely used in amplification circuits with similar specifications.

Note: Before replacing, ensure the substitute matches your circuit’s voltage, current, and gain requirements. Adjust other components, like resistors, if necessary, to maintain performance.


Fairchild BC557BTA Datasheet

Click to download

Fairchild BC557BTA Datasheet


FAQs

1. Can the BC557BTA be used in high-frequency circuits?

Yes, with a transition frequency of 150 MHz, it performs well in high-frequency applications.


2. What is the difference between the BC557 and BC557BTA?

The BC557BTA is a variant of the BC557 with slight packaging or specification differences, but both are functionally similar.


3. Can it replace NPN transistors?

No, as a PNP transistor, it operates differently from NPN types like the BC547.


4. Is it suitable for use in power-intensive applications?

No, it is best for low-power circuits due to its 100mA current limit.


5. How do I identify a fake BC557BTA?

Verify the markings, check the packaging, and compare the performance against the datasheet. Fakes often underperform.


6. Can the BC557BTA work in extreme environments?

Yes, its operating temperature range of -55°C to 150°C allows it to function in harsh conditions.


7. What tools are needed for testing the BC557BTA?

A multimeter is sufficient to test the transistor's base-emitter and base-collector junctions for proper functionality.


8. How does it behave in audio circuits?

Its low noise ensures clean signal amplification, making it ideal for audio systems.


9. Are there any design precautions?

Yes, always use resistors to limit the base current and avoid exceeding its voltage ratings.


10. What are its common failure modes?

Overcurrent, overheating, and incorrect polarity connections can cause damage to the transistor.


Statement: All articles (images, texts, audio) on this site are uploaded and shared by users, or integrated from relevant internet sources, only for user's learning. If your rights are violated, please contact the administrator to delete! Link to this article: https://www.jinftry.com

Related Products

Shopping Cart Tel: +86-755-82518276 Email: sales@jinftry.com Skype: +8615019224070, annies65, +8615118125813 QQ: 568248857, 827259012, 316249462 Mobile: +8615019224070, +8615118118839, +8615118125813 WeChat: Send Message
TOP