1542619 vs 3282-9PG-318
| Part Number |
|
|
| Category | Circular Connectors | Circular Connectors |
| Manufacturer | Phoenix Contact | Conxall/Switchcraft |
| Description | CONN SOCKET 4POS STR M12 SOLDER | CONN PLUG 9POS INLINE PIN |
| Package | - | - |
| Series | SACC | Multi-Con-X? |
| Features | Board Lock | Backshell |
| Mounting Type | Panel Mount, Bulkhead; Through Hole | Free Hanging (In-Line) |
| Termination | Solder | Solder Cup |
| Ingress Protection | IP67 - Dust Tight, Waterproof | Weathertight |
| Current Rating | 4A | - |
| Voltage - Rated | 250V | 600V |
| Contact Finish | Gold | Gold |
| Orientation | D | Keyed |
| Number of Positions | 4 | 9 |
| Connector Type | Receptacle, Female Sockets | Plug, Male Pins |
| Shell Size - Insert | M12-4 | - |
| Fastening Type | Push-Twist | Bayonet Lock |
| Shell Material, Finish | Brass, Nickel Plated | Nylon |
-
1. How to cnlinko 4 pin power industrial circular connector
1. Confirm the voltage, current and frequency:
2. Choose the right environment: In normal environment, regular plugs and sockets can be used. IP67 anti-immersion plugs and sockets are used in harsh environment.
3. Pay attention to the installation of the connector: Make sure that the socket used to install the connector on the power supply line has a cover to prevent electric shock.
4. Check the connector status: Before use, check whether the model, code, number, plug position and direction of the connector meet the requirements of the design and process documents. 5. Correct plugging and unplugging operation: Before plugging, check whether the code, interface, etc. of the plug to be plugged in correspond to the socket, and accurately position them. -
2. How to get pins out of circular connector
Use professional tools: For some connectors, professional tools may be required to safely remove pins. For example, the small two-petal needle remover mentioned may not be very easy to use, but if there is no other better method, you can try to use it. If the connector is damaged or the repair cost is too high, consider replacing a new connector.
-
3. What is a circular connector
A circular connector is a cylindrical electronic connector with a circular mating surface. It belongs to the fifth category of the interconnection classification and is mainly used for interconnection between devices. The design of circular connectors includes many types, such as low-frequency circular connectors, RF coaxial connectors and audio connectors, etc., with a wide operating temperature range from -55℃ to +150℃.
-
4. How to remove a circular electrical connector
1. Loosen the locking ring. To remove a circular electrical connector, you first need to loosen the locking ring;
2. Remove the sealant. There is a sealant on the connector, which needs to be removed first.
3. Remove the terminal. First, loosen the terminal fastening or open the slot, and then carefully separate the plug and the socket;
