43-00130 vs PLA1G523010
| Part Number |
|
|
| Category | Circular Connectors | Circular Connectors |
| Manufacturer | Conec | ITT Cannon, LLC |
| Description | CONN PLUG 8POS CABLE SKT | CONN PLUG MALE 10POS GOLD SLDR |
| Package | - | - |
| Series | 43 | PL |
| Mounting Type | Free Hanging (In-Line) | Free Hanging (In-Line) |
| Termination | Screw | Solder Cup |
| Ingress Protection | IP67 - Dust Tight, Waterproof | IP50 - Dust Protected |
| Current Rating | 2A | 3A |
| Voltage - Rated | 30V | - |
| Contact Finish | Gold | Gold |
| Orientation | A | 0° |
| Number of Positions | 8 | 10 |
| Connector Type | Plug, Female Sockets | Plug, Male Pins |
| Shell Size - Insert | M12-8 | - |
| Fastening Type | Threaded | Latch Lock, Push-Pull |
| Shell Material, Finish | Polyamide (PA6), Nylon 6, Glass Filled | Polysulfone (PSU) |
-
1. How to solder a circular connector
1. Remove the insulator, prepare the soldering iron and needle-nosed pliers or tweezers;
2. Place the blade of the soldering iron tip close to the solder joint, and keep the soldering iron at an angle of about 60° to the horizontal plane so that the molten tin can flow smoothly from the soldering iron tip to the solder joint. The time the soldering iron tip stays at the solder joint should be controlled to 1-2 seconds;
3. Make sure that the insulator is not burned, the tin on the solder joint is smooth, burr-free, and there is no cold solder joint, and the definition of the solder wire meets the requirements of the drawing. -
2. How to wire a circular connector
1. Insert the wire into the pin hole inside the connector to ensure that the metal conductor is in full contact with the pin.
2. Use wire twisters to tighten the screws or clips on the connector to ensure good and firm contact between the connector and the wire.
3. Check if there is any exposed metal surface on the connector. If necessary, re-strip it.
4. Wrap the connected wires with electrical tape to prevent loosening or short circuit problems. -
3. What is a circular connector
A circular connector is a cylindrical electronic connector with a circular mating surface. It belongs to the fifth category of the interconnection classification and is mainly used for interconnection between devices. The design of circular connectors includes many types, such as low-frequency circular connectors, RF coaxial connectors and audio connectors, etc., with a wide operating temperature range from -55℃ to +150℃.
-
4. What is the definition of a connector?
Connector, that is, CONNECTOR. It is also called connector, plug and socket in China. Generally refers to an electrical connector. That is, a device that connects two active devices to transmit current or signals. Connectors are a component that our electronic engineering technicians often come into contact with.
