43-01199 vs C016 20H003 100 12
| Part Number |
|
|
| Category | Circular Connectors | Circular Connectors |
| Manufacturer | Conec | Amphenol Sine Systems Corp |
| Description | CONN RCPT 5POS JAM NUT SKT RA | CONN MALE PLUG 3+PE SCREW SILVR |
| Package | - | - |
| Series | 43 | Eco|mate? C016 |
| Features | Board Lock | Cable Clamp |
| Mounting Type | Panel Mount, Bulkhead; Through Hole, Right Angle | Free Hanging (In-Line) |
| Termination | Solder | Screw |
| Ingress Protection | IP67 - Dust Tight, Waterproof | IP65/67 - Dust Tight, Water Resistant, Waterproof |
| Current Rating | 4A | 16A |
| Voltage - Rated | 60V | 400V |
| Contact Finish | Gold | Silver |
| Orientation | A | Keyed |
| Number of Positions | 5 | 4 |
| Connector Type | Receptacle, Female Sockets | Plug, Male Pins |
| Shell Size - Insert | M12-5 | - |
| Fastening Type | Threaded | Threaded |
| Shell Material, Finish | Copper Zinc Alloy, Nickel Plated | Polyamide |
-
1. How to solder a circular connector
1. Remove the insulator, prepare the soldering iron and needle-nosed pliers or tweezers;
2. Place the blade of the soldering iron tip close to the solder joint, and keep the soldering iron at an angle of about 60° to the horizontal plane so that the molten tin can flow smoothly from the soldering iron tip to the solder joint. The time the soldering iron tip stays at the solder joint should be controlled to 1-2 seconds;
3. Make sure that the insulator is not burned, the tin on the solder joint is smooth, burr-free, and there is no cold solder joint, and the definition of the solder wire meets the requirements of the drawing. -
2. How to wire a circular connector
1. Insert the wire into the pin hole inside the connector to ensure that the metal conductor is in full contact with the pin.
2. Use wire twisters to tighten the screws or clips on the connector to ensure good and firm contact between the connector and the wire.
3. Check if there is any exposed metal surface on the connector. If necessary, re-strip it.
4. Wrap the connected wires with electrical tape to prevent loosening or short circuit problems. -
3. What are circular connectors used for
Circular connectors are mainly used for power connection, signal transmission, mechanical connection, etc. It is a multifunctional electronic connector widely used in various electronic devices and application scenarios.
-
4. What is the circular connector called
Circular connectors are also called circular electrical connectors, sealed circular connectors, aviation plugs, waterproof connectors, etc. Different names for different usage environments: waterproof connectors, waterproof plugs; sealed circular connectors, etc.
