43-01700 vs 1412233
| Part Number |
|
|
| Category | Circular Connectors | Circular Connectors |
| Manufacturer | Conec | Phoenix Contact |
| Description | CONN RCPT 5POS PNL MNT THRU PIN | CONN CIRCULAR PLUG 3 POS SMD |
| Package | - | - |
| Series | 43 | SACC |
| Mounting Type | Panel Mount, Through Hole | Surface Mount |
| Termination | Solder | Solder |
| Ingress Protection | IP67 - Dust Tight, Waterproof | IP65/67 - Dust Tight, Water Resistant, Waterproof |
| Current Rating | 4A | - |
| Voltage - Rated | 60V | 50VAC, 60VDC |
| Contact Finish | Gold | Gold |
| Orientation | A | A |
| Number of Positions | 5 | 3 |
| Connector Type | Receptacle, Male Pins | Insert, Male Pins |
| Shell Size - Insert | M12-5 | M8-3 |
| Fastening Type | Push-Pull | - |
| Shell Material, Finish | Plastic | - |
| Features | - | Insert Only, Requires Shell |
-
1. How to cnlinko 4 pin power industrial circular connector
1. Confirm the voltage, current and frequency:
2. Choose the right environment: In normal environment, regular plugs and sockets can be used. IP67 anti-immersion plugs and sockets are used in harsh environment.
3. Pay attention to the installation of the connector: Make sure that the socket used to install the connector on the power supply line has a cover to prevent electric shock.
4. Check the connector status: Before use, check whether the model, code, number, plug position and direction of the connector meet the requirements of the design and process documents. 5. Correct plugging and unplugging operation: Before plugging, check whether the code, interface, etc. of the plug to be plugged in correspond to the socket, and accurately position them. -
2. What is the circular connector called
Circular connectors are also called circular electrical connectors, sealed circular connectors, aviation plugs, waterproof connectors, etc. Different names for different usage environments: waterproof connectors, waterproof plugs; sealed circular connectors, etc.
-
3. How to remove the circular plastic terminal head
1. Use scissors or flat-nosed pliers to cut off or remove the outer shell on the circular plastic terminal head to expose the internal wiring part.
2. Use a screwdriver to loosen the screws on the terminal head to remove the terminal head.
3. Gently pull the terminal head by hand to remove it from the wire.
4. If the terminal head is very tight, you can use flat-nosed pliers or pliers to increase the removal force.
5. If you need to replace a new terminal head, you can insert the new terminal head into the wire and tighten the screws to ensure that the wiring is firm. -
4. What is the definition of a connector?
Connector, that is, CONNECTOR. It is also called connector, plug and socket in China. Generally refers to an electrical connector. That is, a device that connects two active devices to transmit current or signals. Connectors are a component that our electronic engineering technicians often come into contact with.
