6339114-1 vs MRJ518401
| Part Number |
|
|
| Category | Modular Connectors - Jacks | Modular Connectors - Jacks |
| Manufacturer | TE Connectivity AMP Connectors | Amphenol ICC (Commercial Products) |
| Description | CONN MOD JACK 8P8C R/A SHIELDED | CONN MOD JACK 8P8C VERT UNSHLD |
| Package | - | - |
| Series | - | MRJ |
| Features | Board Guide | Board Guide, Dust Cap |
| Mounting Type | Through Hole | Panel Mount, Flange (2 Hole); Through Hole |
| Termination | Solder | Solder |
| Contact Material | Phosphor Bronze | Phosphor Bronze |
| Contact Finish | Gold | Gold |
| Orientation | 90° Angle (Right) | Vertical |
| Ratings | Cat5 | - |
| Connector Type | Jack | Jack |
| Shielding | Shielded, EMI Finger | Unshielded |
| Number of Rows | 2 | 1 |
| Number of Positions/Contacts | 8p8c (RJ45, Ethernet) | 8p8c (RJ45, Ethernet) |
| Number of Ports | 12 | 1 |
| LED Color | Does Not Contain LED | Yellow - Green |
| Tab Direction | Up and Down | User Selectable |
| Ingress Protection | - | IP67 - Dust Tight, Waterproof |
-
1. What is a modular connector?
A modular connector is a device used to connect different electronic modules. It can connect electronic modules of different powers, different types and different manufacturers together to form a fully functional electronic device. Modular connectors usually consist of multiple connecting sub-components, conductive sheets, contact agents, etc.
-
2. What are the different types of RJ45 modular jacks?
There are two main types of RJ45 modular jacks, namely DTE (data terminal equipment) type and DCE (digital communication equipment) type.
The difference between these two types lies in the way they are connected to different devices.
The DTE type is mainly used in Ethernet network cards, routers and other devices. When two DTE type devices use RJ45 interface connection for communication, they must be connected using a crossover cable. This is because the data sending and receiving pins of the DTE type interface cannot perform normal data communication if they are not cross-connected.
The DCE type is usually used in devices such as switches. When connected to a DTE type device, the DCE type device can automatically negotiate with the other party. At this time, a straight-through line or a parallel line can be used for connection, depending on the automatic negotiation capability of the device. -
3. What is the correct term for RJ45 modular plug?
The correct term for RJ45 modular plug is RJ45 plug.
RJ45 plug, also known as crystal head, is a commonly used connector in network cabling system. It consists of 8 contacts and is divided into two types: shielded and unshielded. -
4. What is the difference between modular cable and non-modular cable?
The main difference between modular cable and non-modular cable is the detachability of the cable and the design structure of the power supply.
Modular cable, also known as modular power supply, allows the cable to be disassembled and reconfigured according to needs, providing greater flexibility and convenience. This design allows the cable to be matched according to personal needs, reducing the storage space of the cable and making the inside of the computer case neater. In addition, the cable of the modular power supply can be upgraded and replaced, further increasing the flexibility of use. However, the number of cables of the modular power supply is large and the quality is unstable, so it is necessary to purchase a good quality power supply, which increases the cost consideration.
Non-modular cables, that is, non-modular power supplies, all of whose wires and cables are fixed and cannot be removed, which may cause cross-wiring of cables, making the entire computer look messy. T
