88-569746-32P vs PT06CP-16-8S
| Part Number |
|
|
| Category | Circular Connectors | Circular Connectors |
| Manufacturer | Amphenol Aerospace Operations | Amphenol Industrial Operations |
| Description | JTP02RE-18-32P-014 W/ PC CON | CONN PLUG 8POS INLINE SKT |
| Package | - | - |
| Series | * | MIL-DTL-26482 Series I, PT |
| Features | - | Potted |
| Mounting Type | - | Free Hanging (In-Line) |
| Termination | - | Crimp |
| Current Rating | - | 13A |
| Voltage - Rated | - | 1000VAC |
| Contact Finish | - | Gold |
| Orientation | - | N (Normal) |
| Number of Positions | - | 8 |
| Connector Type | - | Plug, Female Sockets |
| Shell Size - Insert | - | 16-8 |
| Fastening Type | - | Bayonet Lock |
| Shell Material, Finish | - | Aluminum, Olive Drab Cadmium Plated |
-
1. How to solder a circular connector
1. Remove the insulator, prepare the soldering iron and needle-nosed pliers or tweezers;
2. Place the blade of the soldering iron tip close to the solder joint, and keep the soldering iron at an angle of about 60° to the horizontal plane so that the molten tin can flow smoothly from the soldering iron tip to the solder joint. The time the soldering iron tip stays at the solder joint should be controlled to 1-2 seconds;
3. Make sure that the insulator is not burned, the tin on the solder joint is smooth, burr-free, and there is no cold solder joint, and the definition of the solder wire meets the requirements of the drawing. -
2. What are circular connectors used for
Circular connectors are mainly used for power connection, signal transmission, mechanical connection, etc. It is a multifunctional electronic connector widely used in various electronic devices and application scenarios.
-
3. What does s mean in circular connectors sealcon
S-Video, the full name of Separate Video, is also known as SUPER VIDEO. It is a video signal transmission standard used to separate the brightness and color of the video signal to avoid mutual interference between brightness and color when the mixed video signal is output.
-
4. How to remove the circular plastic terminal head
1. Use scissors or flat-nosed pliers to cut off or remove the outer shell on the circular plastic terminal head to expose the internal wiring part.
2. Use a screwdriver to loosen the screws on the terminal head to remove the terminal head.
3. Gently pull the terminal head by hand to remove it from the wire.
4. If the terminal head is very tight, you can use flat-nosed pliers or pliers to increase the removal force.
5. If you need to replace a new terminal head, you can insert the new terminal head into the wire and tighten the screws to ensure that the wiring is firm.
