8P1P002200GRB01 vs 1419755
| Part Number |
|
|
| Category | Circular Connectors | Circular Connectors |
| Manufacturer | NorComp Inc. | Phoenix Contact |
| Description | CONN RCPT FMALE 2POS GOLD SOLDER | CONN RCPT 4POS JAM NUT SKT M12 |
| Package | - | - |
| Series | QUIK-LOQ? 8P1P | SACC |
| Mounting Type | Panel Mount, Bulkhead - Front Side Nut | Panel Mount, Bulkhead - Front Side Nut |
| Termination | Solder Cup | Solder |
| Ingress Protection | IP50 - Dust Protected | IP67 - Dust Tight, Waterproof |
| Current Rating | 10A | 4A |
| Voltage - Rated | 500V | 250V |
| Contact Finish | Gold | Gold |
| Orientation | Keyed | A |
| Number of Positions | 2 | 4 |
| Connector Type | Receptacle, Female Sockets | Receptacle, Female Sockets |
| Fastening Type | Push-Pull | Push-Twist |
| Shell Material, Finish | Polyacrylonitrile Butadiene Styrene (ABS), Polycarbonate (PC) | Zinc Die Cast, Nickel Plated |
| Shell Size - Insert | - | M12-4 |
-
1. How to cnlinko 4 pin power industrial circular connector
1. Confirm the voltage, current and frequency:
2. Choose the right environment: In normal environment, regular plugs and sockets can be used. IP67 anti-immersion plugs and sockets are used in harsh environment.
3. Pay attention to the installation of the connector: Make sure that the socket used to install the connector on the power supply line has a cover to prevent electric shock.
4. Check the connector status: Before use, check whether the model, code, number, plug position and direction of the connector meet the requirements of the design and process documents. 5. Correct plugging and unplugging operation: Before plugging, check whether the code, interface, etc. of the plug to be plugged in correspond to the socket, and accurately position them. -
2. How to remove the circular plastic terminal head
1. Use scissors or flat-nosed pliers to cut off or remove the outer shell on the circular plastic terminal head to expose the internal wiring part.
2. Use a screwdriver to loosen the screws on the terminal head to remove the terminal head.
3. Gently pull the terminal head by hand to remove it from the wire.
4. If the terminal head is very tight, you can use flat-nosed pliers or pliers to increase the removal force.
5. If you need to replace a new terminal head, you can insert the new terminal head into the wire and tighten the screws to ensure that the wiring is firm. -
3. How to remove a circular electrical connector
1. Loosen the locking ring. To remove a circular electrical connector, you first need to loosen the locking ring;
2. Remove the sealant. There is a sealant on the connector, which needs to be removed first.
3. Remove the terminal. First, loosen the terminal fastening or open the slot, and then carefully separate the plug and the socket; -
4. What is the definition of a connector?
Connector, that is, CONNECTOR. It is also called connector, plug and socket in China. Generally refers to an electrical connector. That is, a device that connects two active devices to transmit current or signals. Connectors are a component that our electronic engineering technicians often come into contact with.
