D38999/26MJ37PE vs D38999/46FJ29PD
| Part Number |
|
|
| Category | Circular Connectors | Circular Connectors |
| Manufacturer | Amphenol Aerospace Operations | TE Connectivity Deutsch Connectors |
| Description | CONN PLUG MALE 37POS GOLD CRIMP | D38999/46FJ29PD |
| Package | - | - |
| Series | Military, MIL-DTL-38999 Series III, Tri-Start? TV | * |
| Features | Shielded | - |
| Mounting Type | Free Hanging (In-Line) | - |
| Termination | Crimp | - |
| Ingress Protection | Environment Resistant | - |
| Contact Finish | Gold | - |
| Orientation | E | - |
| Number of Positions | 37 | - |
| Connector Type | Plug, Male Pins | - |
| Shell Size - Insert | 25-37 | - |
| Fastening Type | Threaded | - |
| Shell Material, Finish | Composite, Nickel Plated, Electroless | - |
| Shell Size, MIL | J | - |
-
1. How to wire a circular connector
1. Insert the wire into the pin hole inside the connector to ensure that the metal conductor is in full contact with the pin.
2. Use wire twisters to tighten the screws or clips on the connector to ensure good and firm contact between the connector and the wire.
3. Check if there is any exposed metal surface on the connector. If necessary, re-strip it.
4. Wrap the connected wires with electrical tape to prevent loosening or short circuit problems. -
2. What are circular connectors used for
Circular connectors are mainly used for power connection, signal transmission, mechanical connection, etc. It is a multifunctional electronic connector widely used in various electronic devices and application scenarios.
-
3. What is a circular connector
A circular connector is a cylindrical electronic connector with a circular mating surface. It belongs to the fifth category of the interconnection classification and is mainly used for interconnection between devices. The design of circular connectors includes many types, such as low-frequency circular connectors, RF coaxial connectors and audio connectors, etc., with a wide operating temperature range from -55℃ to +150℃.
-
4. How to remove a circular electrical connector
1. Loosen the locking ring. To remove a circular electrical connector, you first need to loosen the locking ring;
2. Remove the sealant. There is a sealant on the connector, which needs to be removed first.
3. Remove the terminal. First, loosen the terminal fastening or open the slot, and then carefully separate the plug and the socket;
