JK0-0229NL vs 1840437-1
| Part Number |
|
|
| Category | Modular Connectors - Jacks With Magnetics | Modular Connectors - Jacks With Magnetics |
| Manufacturer | Pulse Electronics Network | TRP Connector B.V. |
| Description | CONN MAGJACK 1PORT GIGA POE 140W | CONN MAGJACK 1PORT 1000 BASE-T |
| Package | - | - |
| Series | PULSEJACK? JK | MagJack? |
| Features | Board Guide, Board Lock | Board Guide |
| Operating Temperature | 0°C ~ 70°C | 0°C ~ 70°C |
| Mounting Type | Through Hole | Board Edge, Through Hole |
| Applications | 10/100/1000 Base-T, AutoMDIX | 10/100/1000 Base-T, AutoMDIX |
| Termination | Solder | Solder |
| Contact Material | Phosphor Bronze | Phosphor Brass |
| Contact Finish | Gold | Gold |
| Orientation | 90° Angle (Right) | 90° Angle (Right) |
| Height Above Board | 0.546" (13.87mm) | 0.290" (7.37mm) |
| Connector Type | RJ45 | RJ45 |
| Shielding | Shielded, EMI Finger | Shielded, EMI Finger |
| Number of Rows | 1 | 1 |
| Number of Ports | 1 | 1 |
| LED Color | Green - Yellow | Green, Orange - Yellow |
| Tab Direction | Up | Down |
| Number of Cores per Jack | 8 | 8 |
-
1. How to choose the right Modular Connectors - Jacks With Magnetics?
Factors to consider when choosing:
Number of ports: single-port, multi-port, or stacked configurations.
Speed support: such as 1Gb/s, 10Gb/s, or higher.
Mounting method: panel mount, onboard mount, or through-hole mount.
Shielding performance: whether EMI/RFI shielding is required. -
2. What Ethernet standards do Modular Connectors - Jacks With Magnetics support?
These connectors typically support 10/100/1000 Base-T, 2.5Gb/s, 5Gb/s, and 10Gb/s Ethernet standards, and are compatible with PoE (Power over Ethernet) Type 1 to Type 4.
-
3. What is PoE support? Why is it important?
PoE (Power over Ethernet) allows data and power to be transmitted simultaneously over Ethernet cables, reducing wiring complexity. Modular Connectors - Jacks With Magnetics support PoE and are suitable for devices that require remote power supply (such as IP cameras and VoIP phones).
-
4. Are Modular Connectors - Jacks With Magnetics complicated to install and maintain?
The installation is relatively simple and can usually be completed with standard tools (such as crimping tools). In terms of maintenance, due to its modular design, it is very convenient to replace or upgrade the connector, which is suitable for field installation and repair (MRO) scenarios.
