MP2736DQG-LF-Z vs ISL84521IVZ-T
| Part Number |
|
|
| Category | Interface - Analog Switches, Multiplexers, Demultiplexers | Interface - Analog Switches, Multiplexers, Demultiplexers |
| Manufacturer | Monolithic Power Systems Inc. | Intersil |
| Description | IC SWITCH SPDT | IC SWITCH QUAD SPST 16TSSOP |
| Package | 10-VFQFN | 16-TSSOP (0.173", 4.40mm Width) |
| Series | - | - |
| Operating Temperature | -40°C ~ 85°C (TA) | -40°C ~ 85°C (TA) |
| Package / Case | 10-VFQFN | 16-TSSOP (0.173", 4.40mm Width) |
| Supplier Device Package | 10-QFN (1.8x1.4) | 16-TSSOP |
| Number of Circuits | 2 | 4 |
| On-State Resistance (Max) | 450 mOhm | 100 Ohm |
| Voltage - Supply, Single (V+) | 1.65 V ~ 5.5 V | 2 V ~ 12 V |
| Multiplexer/Demultiplexer Circuit | 2:1 | 1:1 |
| Switch Circuit | SPDT | SPST - NC |
| -3db Bandwidth | 50MHz | - |
| Channel-to-Channel Matching (ΔRon) | 10 mOhm | 1 Ohm |
| Switch Time (Ton, Toff) (Max) | 36ns, 30ns | 80ns, 30ns |
| Channel Capacitance (CS(off), CD(off)) | 55pF | 2pF, 2pF |
| Current - Leakage (IS(off)) (Max) | 40nA | 1nA |
| Crosstalk | -70dB @ 100kHz | -90dB @ 100kHz |
| Voltage - Supply, Dual (V±) | - | ±2 V ~ 6 V |
| Charge Injection | - | 1pC |
-
1. What is an analog switch?
An analog switch is an electronic component that is mainly used for switching operations in analog signal circuits. Unlike digital switches, analog switches operate analog signals and can realize functions such as selection, switching and adjustment of analog signals. Analog switches are usually composed of semiconductor devices such as MOSFET or bidirectional diodes, which can complete tasks such as switching, selecting and processing analog signals.
-
2. What is an analog multiplexer?
An analog multiplexer is a device that can receive multiple input signals and combine these signals into one output signal according to certain rules. It combines multiple signals into one signal through a shared medium, thereby realizing signal multiplexing transmission. Analog multiplexers are widely used in communication systems, especially in television and radio transmission, where multiple signals are combined according to frequency division through frequency division multiplexing technology, and then transmitted through shared channels.
What is the difference between a multiplexer and an analog switch?
The main differences between a multiplexer and an analog switch are application scenarios, number of channels and signal processing capabilities.
Application scenarios and number of channels
Multiplexer: Mainly used in applications with a large number of channels, such as 4:1, 8:1, 16:1, etc. It can receive multiple input signals and synthesize a single output signal in a predetermined order, which is suitable for scenarios where multiple signals need to be processed simultaneously.
Analog switch: Mainly used in scenarios with a small number of channels, such as SPST (single pole single throw), SPDT (single pole double throw), etc. It is mainly used for channel selection or gear switching, and is suitable for scenarios where each channel needs to be controlled separately.
Signal processing capabilities
Multiplexer: It can process multiple input signals at the same time, divide each input signal into a series of time slices through time division multiplexing (TDM) technology, and transmit them in sequence. It requires high accuracy and stability to ensure accurate data transmission and low bit error rate.
Analog switch: Mainly used for channel selection, it cannot turn on multiple channels at the same time. The switch state of each channel is independent, which is suitable for scenarios where each channel needs to be controlled separately.
-
3. What are the different types of analog switches?
There are mainly the following types of analog switches:
MOSFET switch: an analog switch based on metal-oxide-semiconductor field-effect transistor (MOSFET), suitable for low power consumption, high precision, high speed, large bandwidth and other requirements. MOSFET switches have the characteristics of low on-resistance, high off-resistance, high switching speed and low power consumption, and are widely used in audio amplifiers, video processing, data acquisition and other aspects.
Bidirectional diode switch: an analog switch based on PNP/NPN bidirectional diode, suitable for low voltage, low speed and other requirements. Bidirectional diode switches have the advantages of low on-resistance, high off-resistance and low temperature saturation current, and are often used in analog signal selection, matching networks and other aspects.
CMOS switch: an analog switch based on complementary metal oxide semiconductor (CMOS), with the characteristics of low power consumption and high-speed switching, suitable for occasions requiring low power consumption and high speed.
JFET switch: an analog switch based on junction field effect transistor (JFET), suitable for applications requiring high input impedance and low noise.
BiCMOS switch: an analog switch based on bipolar complementary metal oxide semiconductor (BiCMOS), combining the advantages of bipolar transistors and CMOS, suitable for applications requiring high speed and high precision.
MEMS switch: An analog switch based on microelectromechanical systems (MEMS), suitable for applications that require miniaturization and high reliability. -
4. What is the difference between an analog switch and a digital switch?
Difference between analog switches and digital switches: 1. The function of an analog switch is to transmit analog signals. Since digital signals are also composed of two analog voltages from high to low, analog switches can also transmit digital signals; while digital switches mainly refer to MUX. 2. The signal current of a digital switch gate usually does not reach the output end; while an analog switch refers to a switch similar to an actual switch, whose signal current flows through the input end to the output end.
