PBLS1502V,115 vs PBLS1504V,115
| Part Number |
|
|
| Category | Transistors - Bipolar (BJT) - Arrays, Pre-Biased | Transistors - Bipolar (BJT) - Arrays, Pre-Biased |
| Manufacturer | NXP USA Inc. | NXP USA Inc. |
| Description | TRANS NPN PREBIAS/PNP SOT666 | TRANS NPN PREBIAS/PNP SOT666 |
| Package | Cut Tape (CT) | Cut Tape (CT) |
| Series | - | - |
| Mounting Type | Surface Mount | Surface Mount |
| Package / Case | SOT-563, SOT-666 | SOT-563, SOT-666 |
| Supplier Device Package | SOT-666 | SOT-666 |
| Power - Max | 300mW | 300mW |
| Transistor Type | 1 NPN Pre-Biased, 1 PNP | 1 NPN Pre-Biased, 1 PNP |
| Current - Collector (Ic) (Max) | 100mA, 500mA | 100mA, 500mA |
| Voltage - Collector Emitter Breakdown (Max) | 50V, 15V | 50V, 15V |
| Vce Saturation (Max) @ Ib, Ic | 150mV @ 500µA, 10mA / 250mV @ 50mA, 500mA | 150mV @ 500µA, 10mA / 250mV @ 50mA, 500mA |
| Current - Collector Cutoff (Max) | 1µA, 100nA | 1µA, 100nA |
| DC Current Gain (hFE) (Min) @ Ic, Vce | 30 @ 10mA, 5V / 150 @ 100mA, 2V | 60 @ 5mA, 5V / 150 @ 100mA, 2V |
| Frequency - Transition | 280MHz | 280MHz |
| Resistor - Base (R1) | 4.7kOhms | 22kOhms |
| Resistor - Emitter Base (R2) | 4.7kOhms | 22kOhms |
-
1. What is a pre-biased BJT array?
A pre-biased BJT array is a set of bipolar transistors integrated into a single package, each with built-in biasing resistors. These resistors simplify circuit design by eliminating the need for external components in biasing configurations.
-
2. What are the common applications of pre-biased BJT arrays?
They are commonly used in logic-level translation, switching applications, signal amplification, and in circuits requiring compact design and low power consumption.
-
3. How do pre-biased BJTs differ from standard BJTs?
Pre-biased BJTs include integrated resistors, reducing the need for external components. This saves PCB space and simplifies the design process compared to standard BJTs.
-
4. What is the maximum current and voltage rating for these transistors?
Typical ratings are up to 100mA for current and 50V for voltage. These values depend on the specific model and package type.
