QGP363 vs AFD 50-14-4 SN 6117
| Part Number |
|
|
| Category | Circular Connectors | Circular Connectors |
| Manufacturer | Switchcraft Inc. | TE Connectivity Deutsch Connectors |
| Description | CONN RCPT CORD 3POS FMALE PNL MT | AFD 50-14-4 SN 6117 |
| Package | - | - |
| Series | Q-G? QGP | * |
| Features | Cable Clamp, Strain Relief | - |
| Mounting Type | Panel Mount | - |
| Termination | Solder | - |
| Orientation | Keyed | - |
| Number of Positions | 3 | - |
| Connector Type | Plug, Female Sockets | - |
| Shell Size - Insert | XLR | - |
| Fastening Type | Latch Lock | - |
-
1. How to get pins out of circular connector
Use professional tools: For some connectors, professional tools may be required to safely remove pins. For example, the small two-petal needle remover mentioned may not be very easy to use, but if there is no other better method, you can try to use it. If the connector is damaged or the repair cost is too high, consider replacing a new connector.
-
2. How to solder a circular connector
1. Remove the insulator, prepare the soldering iron and needle-nosed pliers or tweezers;
2. Place the blade of the soldering iron tip close to the solder joint, and keep the soldering iron at an angle of about 60° to the horizontal plane so that the molten tin can flow smoothly from the soldering iron tip to the solder joint. The time the soldering iron tip stays at the solder joint should be controlled to 1-2 seconds;
3. Make sure that the insulator is not burned, the tin on the solder joint is smooth, burr-free, and there is no cold solder joint, and the definition of the solder wire meets the requirements of the drawing. -
3. What is the difference between circular and rectangular connectors?
The most essential difference is the shape difference, followed by the difference between parameters, such as voltage, working scene, current, etc. What is the difference between circular connectors and rectangular connectors in terms of appearance, size, structure, color, and function? In terms of appearance, the circular connector is a perfect circle, and the rectangular connector is square. The size can be designed the same.
The structure is a circular track and a square track, and the colors are all industrial electroplating colors. -
4. What are the materials of circular connectors?
1. Metal: It has good mechanical properties and conductivity, and is used for contacts and housings.
2. Plastic: Lightweight, good insulation, and able to resist corrosion by some chemicals, used for insulators and housings.
3. Rubber: Has good elasticity and corrosion resistance, used for waterproofing and sealing.
