RPC1-12P-6S(71) vs T4140512041-000
| Part Number |
|
|
| Category | Circular Connectors | Circular Connectors |
| Manufacturer | Hirose Electric Co Ltd | TE Connectivity AMP Connectors |
| Description | CONN PLUG 6POS INLINE SKT | CONN PLUG MALE 4POS SOLDER GOLD |
| Package | - | - |
| Series | RP | M12 |
| Mounting Type | Free Hanging (In-Line) | Panel Mount, Bulkhead - Front Side Nut; Through Hole |
| Termination | Solder Tabs | Solder |
| Current Rating | 5A | 4A |
| Contact Finish | Silver | Gold |
| Orientation | Keyed | D |
| Number of Positions | 6 | 4 |
| Connector Type | Plug, Female Sockets | Plug, Male Pins |
| Shell Size - Insert | 12 | M12-4 |
| Fastening Type | Push-Pull | Threaded |
| Shell Material, Finish | Polyamide Resin and Polyacetal Resin | Copper Alloy, Nickel Plated |
| Ingress Protection | - | IP67 - Dust Tight, Waterproof |
| Voltage - Rated | - | 250V |
-
1. What is the circular connector called
Circular connectors are also called circular electrical connectors, sealed circular connectors, aviation plugs, waterproof connectors, etc. Different names for different usage environments: waterproof connectors, waterproof plugs; sealed circular connectors, etc.
-
2. How to remove the circular plastic terminal head
1. Use scissors or flat-nosed pliers to cut off or remove the outer shell on the circular plastic terminal head to expose the internal wiring part.
2. Use a screwdriver to loosen the screws on the terminal head to remove the terminal head.
3. Gently pull the terminal head by hand to remove it from the wire.
4. If the terminal head is very tight, you can use flat-nosed pliers or pliers to increase the removal force.
5. If you need to replace a new terminal head, you can insert the new terminal head into the wire and tighten the screws to ensure that the wiring is firm. -
3. How to remove a circular electrical connector
1. Loosen the locking ring. To remove a circular electrical connector, you first need to loosen the locking ring;
2. Remove the sealant. There is a sealant on the connector, which needs to be removed first.
3. Remove the terminal. First, loosen the terminal fastening or open the slot, and then carefully separate the plug and the socket; -
4. How many types of connectors are there?
1. Circular connector,
2. RF connector,
3. Rectangular connector:
4. SMB connector:
5. BNC connector;
