SI53019-A05AGM vs 9ZXL0831EKILF
| Part Number |
|
|
| Category | Clock/Timing - Application Specific | Clock/Timing - Application Specific |
| Manufacturer | Skyworks Solutions Inc. | Renesas Electronics America Inc |
| Description | BUFFERS | DB800ZL |
| Package | Tray | Tray |
| Series | - | - |
| Voltage - Supply | 3.135V ~ 3.465V | 3.135V ~ 3.465V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
| Package / Case | 72-VFQFN Exposed Pad | 48-VFQFN Exposed Pad |
| Supplier Device Package | 72-QFN (10x10) | 48-VFQFPN (6x6) |
| Output | HCSL | HCSL |
| Frequency - Max | 133.33MHz | 400MHz |
| Number of Circuits | - | 1 |
| Input | Clock | Clock |
| PLL | Yes | Yes |
| Main Purpose | Intel QPI, PCI Express (PCIe) | Intel QPI, PCI Express (PCIe) |
| Ratio - Input:Output | 1:19 | 1:8 |
| Differential - Input:Output | Yes/Yes | Yes/Yes |
-
1. What kind of IC is used for a timer?
The commonly used ICs for timers include 555 timer chips, 556 dual 555 timer chips, 74HC series chips, CD4000 series chips, RTC chips, and PLL chips.
The 555 timer chip is a common timing IC that is often used in timers, pulse generators, and oscillation circuits. It was launched by Signetics in 1971 and is widely used in the design of electronic circuits due to its ease of use, low price, and good reliability. A 555 timer can realize various functions by a 555 timer, including generating various timing signals and pulses, as a delay device, trigger or oscillator, etc. -
2. Why is it called a timer IC?
Timer IC (Input Capture) is a function widely used in embedded systems, mainly used to measure parameters such as frequency, width and pulse count of input signals.
Timer IC (Input Capture) mode is a working mode of a general timer. When the channel input pin has a specified level jump, the current CNT value will be latched into CCR, which is often used to measure the frequency, duty cycle, pulse interval, level duration and other parameters of the PWM waveform. Each advanced timer and general timer has 4 input capture channels and can be configured as PWMI mode to measure frequency and duty cycle at the same time.
In STM32 microcontrollers, timers are not only used for basic timing functions, but also realize multiple functions through different working modes. For example, the frequency and width of the input signal can be measured through the input capture mode, and a specific waveform output can be generated through the output comparison mode. -
3. What is the use of timer IC?
The main purpose of the timer IC is input capture, which is used to measure the period, duty cycle and other parameters of the input signal. The timer IC (input capture) mode allows the timer to capture the current count value and store it in the capture/compare register (CCR) when it detects a specific level jump of the input signal. This is often used to measure parameters such as the frequency, duty cycle, pulse interval and level duration of the PWM waveform.
-
4. What is clock CMOS?
Clock CMOS is a chip used to store basic computer startup information. The full name is complementary metal oxide semiconductor (CMOS). It is usually located on the computer motherboard and is used to store basic information such as date, time, and startup settings. CMOS chips use semiconductors made of two elements, silicon and germanium, so that semiconductors with N and P levels coexist on CMOS. The current generated by these two complementary effects can be recorded and interpreted into images by the processing chip.
