TVP00RF-19-88PC-P35AD vs FGL.5K.314.CYMC20

Part Number	TVP00RF-19-88PC-P35AD	FGL.5K.314.CYMC20
Category	Circular Connectors	Circular Connectors
Manufacturer	Amphenol Aerospace Operations	LEMO
Description	CONN RCPT MALE 88POS GOLD SLDR	CONN INLINE PLUG 14SKT CRIMP
Package	-	-
Series	MIL-DTL-38999 Series III, Tri-Start? HD	5K
Features	Alignment Disc, Shielded	Shielded
Mounting Type	Panel Mount, Flange; Through Hole	Free Hanging (In-Line)
Termination	Solder	Crimp
Ingress Protection	Environment Resistant	IP66/68 - Dust Tight, Water Resistant, Waterproof
Contact Finish	Gold	Gold
Orientation	C	L
Number of Positions	88	14
Connector Type	Receptacle, Male Pins	Plug, Female Sockets
Shell Size - Insert	19-88	314
Fastening Type	Threaded	Push-Pull, Detent Lock
Shell Material, Finish	Aluminum, Nickel Plated, Electroless	Brass, Chrome Plated
Current Rating	-	18A

1. How to wire a circular connector

1. Insert the wire into the pin hole inside the connector to ensure that the metal conductor is in full contact with the pin.
2. Use wire twisters to tighten the screws or clips on the connector to ensure good and firm contact between the connector and the wire.
3. Check if there is any exposed metal surface on the connector. If necessary, re-strip it.
4. Wrap the connected wires with electrical tape to prevent loosening or short circuit problems.
2. How to remove a circular electrical connector

1. Loosen the locking ring. To remove a circular electrical connector, you first need to loosen the locking ring;
2. Remove the sealant. There is a sealant on the connector, which needs to be removed first.
3. Remove the terminal. First, loosen the terminal fastening or open the slot, and then carefully separate the plug and the socket;
3. What are the materials of circular connectors?

1. Metal: It has good mechanical properties and conductivity, and is used for contacts and housings.
2. Plastic: Lightweight, good insulation, and able to resist corrosion by some chemicals, used for insulators and housings.
3. Rubber: Has good elasticity and corrosion resistance, used for waterproofing and sealing.
4. How many types of connectors are there?

1. Circular connector,
2. RF connector,
3. Rectangular connector:
4. SMB connector:
5. BNC connector;