FMX-1106S vs FMX-G12S
| Part Number |
|
|
| Category | Diodes - Rectifiers - Single | Diodes - Rectifiers - Single |
| Manufacturer | Sanken | Sanken |
| Description | DIODE GEN PURP 600V 10A TO220F | DIODE GEN PURP 200V 5A TO220F-2L |
| Package | Tape & Reel (TR) | Cut Tape (CT) |
| Series | - | - |
| Mounting Type | Through Hole | Through Hole |
| Package / Case | TO-220-2 Full Pack | TO-220-2 Full Pack |
| Supplier Device Package | TO-220F-2L | TO-220F-2L |
| Diode Type | Standard | Standard |
| Current - Average Rectified (Io) | 10A | 5A |
| Voltage - Forward (Vf) (Max) @ If | 1.5 V @ 5 A | 980 mV @ 5 A |
| Current - Reverse Leakage @ Vr | 50 µA @ 600 V | 100 µA @ 200 V |
| Capacitance @ Vr, F | - | - |
| Voltage - DC Reverse (Vr) (Max) | 600 V | 200 V |
| Speed | Fast Recovery =< 500ns, > 200mA (Io) | Fast Recovery =< 500ns, > 200mA (Io) |
| Reverse Recovery Time (trr) | 30 ns | 30 ns |
| Operating Temperature - Junction | -40°C ~ 150°C | -40°C ~ 150°C |
-
1. What is a single rectifier diode?
A single rectifier diode is an electronic component used to convert alternating current (AC) to direct current (DC), typically used in power supplies, chargers, and other circuits that require DC power.
-
2. How to determine if the rectifier diode is damaged?
Use a multimeter to measure the forward and reverse resistance of a diode. If the diode exhibits low impedance or high impedance in both directions, it may have been damaged. Under normal circumstances, there should be low impedance when conducting in the forward direction, and high impedance when conducting in the reverse direction.
-
3. How to improve the efficiency of rectifier diodes?
The use of Schottky diodes or fast recovery diodes can reduce forward voltage drop and reverse recovery time, thereby improving the efficiency of rectifier circuits, especially in high-frequency applications.
-
4. What are the packaging types of rectifier diodes?
There are various packaging types for rectifier diodes, including axial pin packaging (such as DO-41), surface mount packaging (such as SMA, SMB), and high-power packaging (such as TO-220). When selecting, the appropriate packaging should be chosen based on the application's heat dissipation requirements and installation method.
