FMX-1106S vs VS-ETL0806FP-M3
| Part Number |
|
|
| Category | Diodes - Rectifiers - Single | Diodes - Rectifiers - Single |
| Manufacturer | Sanken | Vishay Semiconductor - Diodes Division |
| Description | DIODE GEN PURP 600V 10A TO220F | DIODE GEN PURP 600V 8A TO220-2 |
| Package | Tape & Reel (TR) | Bulk |
| Series | - | FRED Pt® |
| Mounting Type | Through Hole | Through Hole |
| Package / Case | TO-220-2 Full Pack | TO-220-2 Full Pack |
| Supplier Device Package | TO-220F-2L | TO-220-2 Full Pack |
| Diode Type | Standard | Standard |
| Current - Average Rectified (Io) | 10A | 8A |
| Voltage - Forward (Vf) (Max) @ If | 1.5 V @ 5 A | 1.07 V @ 8 A |
| Current - Reverse Leakage @ Vr | 50 µA @ 600 V | 9 µA @ 600 V |
| Capacitance @ Vr, F | - | - |
| Voltage - DC Reverse (Vr) (Max) | 600 V | 600 V |
| Speed | Fast Recovery =< 500ns, > 200mA (Io) | Fast Recovery =< 500ns, > 200mA (Io) |
| Reverse Recovery Time (trr) | 30 ns | 180 ns |
| Operating Temperature - Junction | -40°C ~ 150°C | -65°C ~ 175°C |
-
1. What is a single rectifier diode?
A single rectifier diode is an electronic component used to convert alternating current (AC) to direct current (DC), typically used in power supplies, chargers, and other circuits that require DC power.
-
2. What is the difference between Schottky diodes and traditional silicon rectifier diodes?
Schottky diodes have a lower forward voltage drop (typically 0.2V to 0.3V) and faster switching speed, making them suitable for high-frequency applications. However, their reverse voltage is relatively low and is typically used in circuits with lower voltages.
-
3. What is the reverse recovery time of a rectifier diode?
Reverse recovery time refers to the time required for a diode to transition from a forward conducting state to a reverse blocking state. A shorter reverse recovery time is particularly important in high-frequency applications to reduce power loss.
-
4. How to determine if the rectifier diode is damaged?
Use a multimeter to measure the forward and reverse resistance of a diode. If the diode exhibits low impedance or high impedance in both directions, it may have been damaged. Under normal circumstances, there should be low impedance when conducting in the forward direction, and high impedance when conducting in the reverse direction.
