QS3VH16244PAG8 vs SN74CBTS16211DGGR
| Part Number |
|
|
| Category | Logic - Signal Switches, Multiplexers, Decoders | Logic - Signal Switches, Multiplexers, Decoders |
| Manufacturer | Renesas Electronics America Inc | Texas Instruments |
| Description | IC BUS SWITCH 4 X 1:1 48TSSOP | IC BUS SWITCH 12 X 1:1 56TSSOP |
| Package | Cut Tape (CT) | Tube |
| Series | 3VH | 74CBTS |
| Type | Bus Switch | Bus Switch |
| Voltage - Supply | 2.3V ~ 3.6V | 4.5V ~ 5.5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
| Package / Case | 48-TFSOP (0.240\", 6.10mm Width) | 56-TFSOP (0.240\", 6.10mm Width) |
| Supplier Device Package | 48-TSSOP | 56-TSSOP |
| Voltage Supply Source | Single Supply | Single Supply |
| Circuit | 4 x 1:1 | 12 x 1:1 |
| Current - Output High, Low | - | - |
| Independent Circuits | 4 | 2 |
-
1. What are multiplexers in digital systems?
Multiplexers in digital systems use digital control signals to determine which input should be selected and passed to the output. This selection is usually based on the state of a set of binary select lines.
-
2. What is the difference between a decoder and a multiplexer?
The difference between a decoder and a multiplexer is that they have opposite functions. A decoder converts encoded data into the corresponding original information or performs a specific operation; while a multiplexer combines multiple signal sources into a single signal stream.
-
3. What is the use of a decoder?
The role of a decoder is to restore the encoded data to the original information or trigger the corresponding function based on the input code. For example, a BCD to 7-segment decoder is a common decoder used to convert binary coded decimal numbers into signals that drive a seven-segment display.
-
4. Is a decoder a transmitter or a receiver?
A decoder is neither a transmitter nor a receiver, but is located between the two to process received data or prepare data to be sent.
