RPC2-12P-3S(72) vs T 3424 991
| Part Number |
|
|
| Category | Circular Connectors | Circular Connectors |
| Manufacturer | Hirose Electric Co Ltd | Amphenol Sine Systems Corp |
| Description | CONN PLUG 3POS CBL SKT | CONN PLUG 6POS INLINE PIN |
| Package | - | - |
| Series | RP | C 091 B |
| Mounting Type | Free Hanging (In-Line) | Free Hanging (In-Line) |
| Termination | Solder Cup | Solder Cup |
| Current Rating | 5A | 7A |
| Contact Finish | Silver | Silver |
| Number of Positions | 3 | 6 |
| Connector Type | Plug, Female Sockets | Plug, Male Pins |
| Shell Size - Insert | 12 | DIN (240 Degree) |
| Fastening Type | Push-Pull | Bayonet Lock |
| Shell Material, Finish | Polyamide Resin and Polyacetal Resin | Plastic |
| Features | - | Strain Relief |
| Ingress Protection | - | IP40 |
| Voltage - Rated | - | 250V |
| Orientation | - | Keyed |
-
1. How to get pins out of circular connector
Use professional tools: For some connectors, professional tools may be required to safely remove pins. For example, the small two-petal needle remover mentioned may not be very easy to use, but if there is no other better method, you can try to use it. If the connector is damaged or the repair cost is too high, consider replacing a new connector.
-
2. What does s mean in circular connectors sealcon
S-Video, the full name of Separate Video, is also known as SUPER VIDEO. It is a video signal transmission standard used to separate the brightness and color of the video signal to avoid mutual interference between brightness and color when the mixed video signal is output.
-
3. What is a circular connector
A circular connector is a cylindrical electronic connector with a circular mating surface. It belongs to the fifth category of the interconnection classification and is mainly used for interconnection between devices. The design of circular connectors includes many types, such as low-frequency circular connectors, RF coaxial connectors and audio connectors, etc., with a wide operating temperature range from -55℃ to +150℃.
-
4. How to remove the circular plastic terminal head
1. Use scissors or flat-nosed pliers to cut off or remove the outer shell on the circular plastic terminal head to expose the internal wiring part.
2. Use a screwdriver to loosen the screws on the terminal head to remove the terminal head.
3. Gently pull the terminal head by hand to remove it from the wire.
4. If the terminal head is very tight, you can use flat-nosed pliers or pliers to increase the removal force.
5. If you need to replace a new terminal head, you can insert the new terminal head into the wire and tighten the screws to ensure that the wiring is firm.
