RPC2-12RB-3P(72) vs 42-01007
| Part Number |
|
|
| Category | Circular Connectors | Circular Connectors |
| Manufacturer | Hirose Electric Co Ltd | Conec |
| Description | CONN RCPT 3POS PNL MNT PIN | CONN RCPT 4POS PNL MNT PIN M8 |
| Package | - | - |
| Series | RP | 42 |
| Mounting Type | Panel Mount, Flange | Panel Mount |
| Termination | Solder Cup | Solder Cup |
| Current Rating | 5A | 3A |
| Contact Finish | Silver | Gold |
| Number of Positions | 3 | 4 |
| Connector Type | Receptacle, Male Pins | Receptacle, Male Pins |
| Shell Size - Insert | 12 | M8-4 |
| Fastening Type | Push-Pull | Push-Pull |
| Shell Material, Finish | Polyamide Resin and Polyacetal Resin | Plastic |
| Features | - | Translucent |
| Ingress Protection | - | IP67 - Dust Tight, Waterproof |
| Voltage - Rated | - | 30V |
| Orientation | - | A |
-
1. How to wire a circular connector
1. Insert the wire into the pin hole inside the connector to ensure that the metal conductor is in full contact with the pin.
2. Use wire twisters to tighten the screws or clips on the connector to ensure good and firm contact between the connector and the wire.
3. Check if there is any exposed metal surface on the connector. If necessary, re-strip it.
4. Wrap the connected wires with electrical tape to prevent loosening or short circuit problems. -
2. What does s mean in circular connectors sealcon
S-Video, the full name of Separate Video, is also known as SUPER VIDEO. It is a video signal transmission standard used to separate the brightness and color of the video signal to avoid mutual interference between brightness and color when the mixed video signal is output.
-
3. What is a circular connector
A circular connector is a cylindrical electronic connector with a circular mating surface. It belongs to the fifth category of the interconnection classification and is mainly used for interconnection between devices. The design of circular connectors includes many types, such as low-frequency circular connectors, RF coaxial connectors and audio connectors, etc., with a wide operating temperature range from -55℃ to +150℃.
-
4. How to remove the circular plastic terminal head
1. Use scissors or flat-nosed pliers to cut off or remove the outer shell on the circular plastic terminal head to expose the internal wiring part.
2. Use a screwdriver to loosen the screws on the terminal head to remove the terminal head.
3. Gently pull the terminal head by hand to remove it from the wire.
4. If the terminal head is very tight, you can use flat-nosed pliers or pliers to increase the removal force.
5. If you need to replace a new terminal head, you can insert the new terminal head into the wire and tighten the screws to ensure that the wiring is firm.
