FQP6N90C vs IRFIZ24NPBF
| Part Number |
|
|
| Category | Transistors - FETs, MOSFETs - Single | Transistors - FETs, MOSFETs - Single |
| Manufacturer | ON Semiconductor | Infineon Technologies |
| Description | MOSFET N-CH 900V 6A TO220-3 | MOSFET N-CH 55V 14A TO220AB FP |
| Package | Tube | Tube |
| Series | QFET® | HEXFET® |
| Operating Temperature | -55°C ~ 150°C (TJ) | -55°C ~ 175°C (TJ) |
| Mounting Type | Through Hole | Through Hole |
| Package / Case | TO-220-3 | TO-220-3 Full Pack |
| Supplier Device Package | TO-220-3 | TO-220AB Full-Pak |
| Technology | MOSFET (Metal Oxide) | MOSFET (Metal Oxide) |
| Power Dissipation (Max) | 167W (Tc) | 29W (Tc) |
| FET Type | N-Channel | N-Channel |
| FET Feature | - | - |
| Drain to Source Voltage (Vdss) | 900 V | 55 V |
| Current - Continuous Drain (Id) @ 25°C | 6A (Tc) | 14A (Tc) |
| Rds On (Max) @ Id, Vgs | 2.3Ohm @ 3A, 10V | 70mOhm @ 7.8A, 10V |
| Vgs(th) (Max) @ Id | 5V @ 250µA | 4V @ 250µA |
| Gate Charge (Qg) (Max) @ Vgs | 40 nC @ 10 V | 20 nC @ 10 V |
| Input Capacitance (Ciss) (Max) @ Vds | 1770 pF @ 25 V | 370 pF @ 25 V |
| Vgs (Max) | ±30V | ±20V |
| Drive Voltage (Max Rds On, Min Rds On) | 10V | 10V |
-
1. What are the main uses of MOSFETs?
As a switch: used to quickly turn a circuit on or off.
As an amplifier: amplifies signals in analog circuits.
As a power switch in applications such as power management, motor control, inverters, etc. -
2. How does a MOSFET work in an inverter?
In an inverter, a MOSFET is used as a switching element, quickly turning the circuit on or off according to the control signal, thereby converting DC power to AC power.
-
3. What is the difference between a JFET and a MOSFET?
A JFET (junction field effect transistor) does not have an insulating layer between the gate and the channel, but instead has a PN junction.
JFETs generally only work in depletion mode, while MOSFETs can be of two types: enhancement mode and depletion mode.
The input impedance of a JFET is lower than that of a MOSFET. -
4. How many watts per channel adcom mosfet 5300 amp？
The Adcom GFA-5300 is a high-power stereo amplifier that uses MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) technology. This amplifier is known for its robust power output and reliability.
The Adcom GFA-5300 amplifier is rated to deliver 200 watts per channel into 8 ohms, and it can provide 300 watts per channel into 4 ohms. These specifications are typical for this model, but always check the specific documentation or manual that came with your unit to confirm the exact specifications, as there might be slight variations depending on the production run or any updates to the design.
