ADI AD5627R/AD5647R/AD5667 series have 12C compatible data transmission capability

ADI AD5627R/AD5647R/AD5667 series have 12C compatible data transmission capability

Analog Devices' AD5667 is a 16-bit, dual-channel, voltage output digital-to-analog converter. It has a built-in reference source and provides the ability to transfer data over an I2C-compatible serial interface. The series includes models: AD5667RBRMZ, AD5667BCPZ-REEL7, AD5667RBCPZ-R2, AD5676BRUZ, AD5693RARMZ, AD623ARZ-RL, AD5592RBCPZ-1-RL7.The ADI models briefly described above are in stock at jinftry.com, welcome to consult

The following are the parameters of AD5627R/AD5647R/AD5667R, AD5627/AD5667:
FEATURES Low power, smallest pin-compatible, dual nanoDACs AD5627R/AD5647R/AD5667R 12-/14-/16-bit On-chip 1.25 V/2.5 V, 5 ppm/°C reference AD5627/AD5667 12-/16-bit External reference only 3 mm x 3 mm LFCSP and 10-lead MSOP 2.7 V to 5.5 V power supply Guaranteed monotonic by design Power-on reset to zero scale Per channel power-down Hardware LDAC and CLR functions I2C-compatible serial interface supports standard (1 00 kHz), fast (400 kHz), and high speed (3.4 MHz) modes
GENERAL DESCRIPTION The AD5627R/AD5647R/AD5667R, AD5627/AD5667 members of the nanoDAC family are low power, dual, 12-, 14-, 16-bit buffered voltage-out DACs with/without on-chip reference. All devices operate from a single 2.7 V to 5.5 V supply, are guaranteed monotonic by design, and have an I2C-compatible serial interface. The AD5627R/AD5647R/AD5667R have an on-chip reference. The AD56x7RBCPZ have a 1.25 V, 5 ppm/°C refer ence, giving a full-scale output range of 2.5 V; the AD56x7RBRMZ have a 2.5 V, 5 ppm/°C reference, giving a full-scale output range of 5 V. The on-chip reference is off at power-up, allowing the use of an external reference. The internal reference is enabled via a software write. The AD5667 and AD5627 require an external reference voltage to set the output range of the DAC. The AD56x7R/AD56x7 incorporate a power-on reset circuit that ensures the DAC out put powers up to 0 V, and remains there until a valid write takes place. The part contains a per-channel power-down feature that reduces the current consumption of the device to 480 nA at 5 V and provides
ADI AD714 series includes: AD7147ACPZ-1500RL7, AD7147ACPZ-REEL, AD7175-2BRUZ, AD7175-2BRUZ-RL7, AD7124-4BRUZ-RL7, AD7177-2BRUZ-RL7 and other models, the following is the parameter picture of AD714:

The ADI models briefly described above are in stock at jinftry.com, welcome to consult.
In general, this type of DAC is widely used in various systems,
automatic test equipment
data acquisition system
power control
Industrial/Process Control
medical equipment
communication device