1542619 vs 3282-9PG-315
| Part Number |
|
|
| Category | Circular Connectors | Circular Connectors |
| Manufacturer | Phoenix Contact | Conxall/Switchcraft |
| Description | CONN SOCKET 4POS STR M12 SOLDER | CONN PLUG 9POS INLINE PIN |
| Package | - | - |
| Series | SACC | Multi-Con-X? |
| Features | Board Lock | Backshell |
| Mounting Type | Panel Mount, Bulkhead; Through Hole | Free Hanging (In-Line) |
| Termination | Solder | Solder Cup |
| Ingress Protection | IP67 - Dust Tight, Waterproof | Weathertight |
| Current Rating | 4A | - |
| Voltage - Rated | 250V | 600V |
| Contact Finish | Gold | Gold |
| Orientation | D | Keyed |
| Number of Positions | 4 | 9 |
| Connector Type | Receptacle, Female Sockets | Plug, Male Pins |
| Shell Size - Insert | M12-4 | - |
| Fastening Type | Push-Twist | Bayonet Lock |
| Shell Material, Finish | Brass, Nickel Plated | Nylon |
-
1. How to cnlinko 4 pin power industrial circular connector
1. Confirm the voltage, current and frequency:
2. Choose the right environment: In normal environment, regular plugs and sockets can be used. IP67 anti-immersion plugs and sockets are used in harsh environment.
3. Pay attention to the installation of the connector: Make sure that the socket used to install the connector on the power supply line has a cover to prevent electric shock.
4. Check the connector status: Before use, check whether the model, code, number, plug position and direction of the connector meet the requirements of the design and process documents. 5. Correct plugging and unplugging operation: Before plugging, check whether the code, interface, etc. of the plug to be plugged in correspond to the socket, and accurately position them. -
2. How to solder a circular connector
1. Remove the insulator, prepare the soldering iron and needle-nosed pliers or tweezers;
2. Place the blade of the soldering iron tip close to the solder joint, and keep the soldering iron at an angle of about 60° to the horizontal plane so that the molten tin can flow smoothly from the soldering iron tip to the solder joint. The time the soldering iron tip stays at the solder joint should be controlled to 1-2 seconds;
3. Make sure that the insulator is not burned, the tin on the solder joint is smooth, burr-free, and there is no cold solder joint, and the definition of the solder wire meets the requirements of the drawing. -
3. What are circular connectors used for
Circular connectors are mainly used for power connection, signal transmission, mechanical connection, etc. It is a multifunctional electronic connector widely used in various electronic devices and application scenarios.
-
4. What is the difference between circular and rectangular connectors?
The most essential difference is the shape difference, followed by the difference between parameters, such as voltage, working scene, current, etc. What is the difference between circular connectors and rectangular connectors in terms of appearance, size, structure, color, and function? In terms of appearance, the circular connector is a perfect circle, and the rectangular connector is square. The size can be designed the same.
The structure is a circular track and a square track, and the colors are all industrial electroplating colors.
