2058588-8 vs 1-2058588-8
| Part Number |
|
|
| Category | Circular Connectors | Circular Connectors |
| Manufacturer | TE Connectivity AMP Connectors | TE Connectivity AMP Connectors |
| Description | CONN PLUG MALE 14POS SLDR RED | CONN PLUG MALE 14POS SLDR BLUE |
| Package | - | - |
| Series | Medical CPC | Medical CPC |
| Features | Disposable | Disposable |
| Mounting Type | Free Hanging (In-Line) | Free Hanging (In-Line) |
| Termination | Solder | Solder |
| Contact Finish | Gold | Gold |
| Orientation | 60° | 80° |
| Number of Positions | 14 | 14 |
| Connector Type | Plug, Male Pins | Plug, Male Pins |
| Fastening Type | Detent Lock | Detent Lock |
| Shell Material, Finish | Thermoplastic | Thermoplastic |
-
1. How to wire a circular connector
1. Insert the wire into the pin hole inside the connector to ensure that the metal conductor is in full contact with the pin.
2. Use wire twisters to tighten the screws or clips on the connector to ensure good and firm contact between the connector and the wire.
3. Check if there is any exposed metal surface on the connector. If necessary, re-strip it.
4. Wrap the connected wires with electrical tape to prevent loosening or short circuit problems. -
2. What are circular connectors used for
Circular connectors are mainly used for power connection, signal transmission, mechanical connection, etc. It is a multifunctional electronic connector widely used in various electronic devices and application scenarios.
-
3. What does s mean in circular connectors sealcon
S-Video, the full name of Separate Video, is also known as SUPER VIDEO. It is a video signal transmission standard used to separate the brightness and color of the video signal to avoid mutual interference between brightness and color when the mixed video signal is output.
-
4. How to remove a circular electrical connector
1. Loosen the locking ring. To remove a circular electrical connector, you first need to loosen the locking ring;
2. Remove the sealant. There is a sealant on the connector, which needs to be removed first.
3. Remove the terminal. First, loosen the terminal fastening or open the slot, and then carefully separate the plug and the socket;
