8P1P00317NGL521 vs AAA4MZH
| Part Number |
|
|
| Category | Circular Connectors | Circular Connectors |
| Manufacturer | NorComp Inc. | Switchcraft Inc. |
| Description | CONN PLUG MALE 3POS GOLD SOLDER | CONN RCPT 4POS INLINE PIN |
| Package | - | - |
| Series | QUIK-LOQ? 8P1P | AAA |
| Features | Backshell | Strain Relief |
| Mounting Type | Free Hanging (In-Line) | Free Hanging (In-Line) |
| Termination | Solder Cup | Solder Cup |
| Ingress Protection | IP50 - Dust Protected | IP66 - Dust Tight, Water Resistant |
| Current Rating | 10A | - |
| Voltage - Rated | 500V | 500VAC |
| Contact Finish | Gold | Silver |
| Orientation | Keyed | Keyed |
| Number of Positions | 3 | 4 |
| Connector Type | Plug, Male Pins | Receptacle, Male Pins |
| Fastening Type | Push-Pull | Latch Lock |
| Shell Material, Finish | Polyacrylonitrile Butadiene Styrene (ABS), Polycarbonate (PC) | Zinc Die Cast, Nickel Plated |
| Shell Size - Insert | - | XLR |
-
1. How to get pins out of circular connector
Use professional tools: For some connectors, professional tools may be required to safely remove pins. For example, the small two-petal needle remover mentioned may not be very easy to use, but if there is no other better method, you can try to use it. If the connector is damaged or the repair cost is too high, consider replacing a new connector.
-
2. What is a circular connector
A circular connector is a cylindrical electronic connector with a circular mating surface. It belongs to the fifth category of the interconnection classification and is mainly used for interconnection between devices. The design of circular connectors includes many types, such as low-frequency circular connectors, RF coaxial connectors and audio connectors, etc., with a wide operating temperature range from -55℃ to +150℃.
-
3. How to remove the circular plastic terminal head
1. Use scissors or flat-nosed pliers to cut off or remove the outer shell on the circular plastic terminal head to expose the internal wiring part.
2. Use a screwdriver to loosen the screws on the terminal head to remove the terminal head.
3. Gently pull the terminal head by hand to remove it from the wire.
4. If the terminal head is very tight, you can use flat-nosed pliers or pliers to increase the removal force.
5. If you need to replace a new terminal head, you can insert the new terminal head into the wire and tighten the screws to ensure that the wiring is firm. -
4. What is the definition of a connector?
Connector, that is, CONNECTOR. It is also called connector, plug and socket in China. Generally refers to an electrical connector. That is, a device that connects two active devices to transmit current or signals. Connectors are a component that our electronic engineering technicians often come into contact with.
