BUW41 vs 2N6751
| Part Number |
|
|
| Category | Transistors - Bipolar (BJT) - Single | Transistors - Bipolar (BJT) - Single |
| Manufacturer | Harris Corporation | Harris Corporation |
| Description | NPN POWER TRANSISTOR | POWER BIPOLAR TRANSISTOR NPN |
| Package | Bulk | Bulk |
| Series | - | - |
| Operating Temperature | - | - |
| Mounting Type | - | - |
| Package / Case | - | - |
| Supplier Device Package | - | - |
| Power - Max | - | - |
| Transistor Type | - | - |
| Current - Collector (Ic) (Max) | - | - |
| Voltage - Collector Emitter Breakdown (Max) | - | - |
| Vce Saturation (Max) @ Ib, Ic | - | - |
| Current - Collector Cutoff (Max) | - | - |
| DC Current Gain (hFE) (Min) @ Ic, Vce | - | - |
| Frequency - Transition | - | - |
-
1. What is the difference between bipolar transistors and CMOS transistors?
The main differences between bipolar transistors and CMOS transistors are in working principles, structures, application scenarios, and power consumption.
Working principle
Bipolar transistor: Bipolar transistors have two types of carriers (holes and electrons) involved in conduction, and they are made of three parts of semiconductors with different doping levels. In bipolar transistors, the emitter emits free electrons, the collector receives holes, and the base controls the on and off of the current.
CMOS transistor: CMOS transistors have only one type of carrier (electrons or holes) involved in conduction, usually using a combination of P-type semiconductors and N-type semiconductors. In CMOS transistors, when the gate voltage is zero, the current does not flow. Only when the gate voltage reaches a certain value, the current will flow, which makes the CMOS transistor consume almost no power when static.
-
2. Is PNP transistor bipolar?
PNP transistor is a bipolar transistor. PNP transistor is a bipolar transistor used in electronic circuits to amplify, switch and control current. Its name "PNP" represents the three different semiconductor regions in its structure: two positive poles (P type) and one negative pole (N type).
-
3. Is BJT transistor a bipolar device?
BJT transistor is a bipolar junction transistor (Bipolar Junction Transistor, referred to as BJT), which is a bipolar device. BJT is composed of two PN junctions, divided into PNP and NPN types, and works through two PN junctions to achieve current amplification.
The working principle of BJT is to amplify the collector current by controlling the base current. When the base potential is higher than the emitter potential, the emitter junction is in a forward biased state, and the collector junction is in a reverse biased state. Since the majority carrier concentration in the emitter region is greater than that in the base region, most of the electrons injected into the base region pass over the collector junction and enter the collector region, forming a collector current, thereby achieving current amplification.
BJT is widely used in electronic circuits, such as amplifiers, switches, oscillators, etc., with amplification capabilities, linear amplification characteristics and high frequency response. -
4. What are the two types of BJT transistors?
There are two main types of BJT transistors: NPN and PNP.
NPN transistor
In an NPN transistor, current flows from the collector to the emitter. The base of an NPN transistor must be connected to a positive voltage for current to flow in. As the current flowing to the base increases, the transistor gradually turns on until the current is completely conducted from the collector to the emitter.
PNP Transistor
In a PNP transistor, the current flows from the emitter to the collector. Therefore, the base of the PNP transistor must be grounded. When the output current is small and the base is negative relative to the emitter, the transistor will turn on and a larger current will flow from the emitter to the collector. Basically, if the base and collector are negative relative to the emitter, the PNP transistor will conduct current from the emitter to the collector.
