CR1402AB vs CR1402AC
| Part Number |
|
|
| Category | TVS - Diodes | TVS - Diodes |
| Manufacturer | Littelfuse Inc. | Littelfuse Inc. |
| Description | TVS DIODE 58VWM TO220 | TVS DIODE 58VWM TO220 |
| Package | TO-220-3 No Tab | TO-220-3 No Tab |
| Series | SiBOD? TO-220 | SiBOD? TO-220 |
| Type | Zener | Zener |
| Operating Temperature | -55°C ~ 175°C (TJ) | -55°C ~ 175°C (TJ) |
| Mounting Type | Through Hole | Through Hole |
| Package / Case | TO-220-3 No Tab | TO-220-3 No Tab |
| Supplier Device Package | TO-220 | TO-220 |
| Applications | General Purpose | General Purpose |
| Voltage - Reverse Standoff (Typ) | 58V | 58V |
| Voltage - Breakdown (Min) | 77V | 77V |
| Power Line Protection | No | No |
| Bidirectional Channels | 2 | 2 |
-
1. What does a TVS diode do?
The main function of TVS diodes (Transient Voltage Suppression Diodes) is to protect electronic equipment from voltage spikes and surge voltages. When the two poles of the TVS diode are impacted by reverse transient high energy, it can change the high impedance between the two poles into low impedance within 10^-12 seconds, while absorbing surge power up to several kilowatts, causing the gap between the two poles to The voltage is clamped to a safe value, thereby effectively protecting precision components in electronic circuits.
The specific working principle of TVS diodes is as follows:
Absorb surge power: TVS diodes can, under reverse application conditions, when subjected to a high-energy large pulse, their working impedance immediately drops to a lower conduction state, allowing large current to pass while clamping the voltage at predetermined level. Its response time is only 10^-12 seconds.
Protection circuit: TVS diodes are used in parallel with the protected circuit. When the circuit is working normally, the TVS diode is in a high impedance state and does not affect the circuit; when there is a surge voltage impact, the TVS diode conducts quickly, absorbs the surge energy, and protects the subsequent circuit.
-
2. What is the difference between TVS and ordinary diodes?
The main difference between TVS diodes and ordinary diodes lies in their working principle, application scenarios and characteristics.
Working principle and application scenarios
TVS diode: TVS diode (Transil Voltage Suppressor) is a high-efficiency protection device that stabilizes and suppresses overvoltage based on the breakdown effect of PN junction. When the voltage exceeds its breakdown voltage, the TVS diode will conduct quickly and release the overvoltage to ground, thus protecting the precision components in the circuit from damage by surge pulses. TVS diodes are widely used in computer systems, communication equipment, automotive electronics, household appliances and other fields to suppress transient overvoltage and electromagnetic interference.
Ordinary Diode: The main function of an ordinary diode is unidirectional conductivity, allowing current to pass in one direction and blocking reverse current. They are widely used in rectification, signal modulation, power management and other scenarios.
Feature comparison
Current size: The Zener breakdown current of TVS diodes is small, usually around 1mA, while the breakdown current of ordinary diodes is larger.
Classification: TVS diodes are divided into unipolar and bipolar according to polarity; ordinary diodes are divided into low-voltage and high-voltage types according to the level of voltage regulation, as well as N-type and P-type materials.
Voltage regulation characteristics: The voltage characteristics of TVS diodes are nonlinear, the resistance before breakdown is high, and the voltage remains constant after breakdown; the voltage of ordinary diodes remains constant at the critical reverse breakdown point, realizing the voltage stabilization function.
-
3. TVS is the abbreviation of diode. What does it mean?
TVS is the abbreviation of Transient Voltage Suppressor, also known as Transient Voltage Suppression Diode.
How TVS diodes work
TVS diodes work using the avalanche breakdown effect. When the TVS diode receives a reverse voltage, the depletion layer near its PN junction will increase, causing the electric field intensity to increase, which in turn triggers the avalanche effect and causes the reverse current to increase sharply. Unlike ordinary diodes, TVS diodes can recover after avalanche breakdown and continue to work normally. -
4. What is the difference between TVS and ESD diodes?
The main difference between TVS diodes and ESD diodes is their working principle, application scenarios and characteristics.
Working principle and application scenarios
TVS diodes (Transient Voltage Suppressors): TVS diodes are mainly used to suppress transient voltages and prevent components in the circuit from being damaged by surge voltages. When the two poles of the TVS diode are impacted by reverse transient high energy, it can change the high impedance to low impedance in a very short time, absorb the surge power, and protect the precision components in the circuit1. TVS diodes are suitable for protection against various surge pulses, such as lightning strikes, large-capacity load switching, etc.
ESD diode (Electro-Static discharge): ESD diode is mainly used to prevent static electricity and prevent damage to electronic equipment caused by electrostatic discharge. ESD diodes have low capacitance values, typically between 1 and 3.5 picofarad (PF), to accommodate the rapid changes in electrostatic discharge. ESD diodes are suitable for board-level protection, especially in high-speed USB and I/O interfaces, which have higher requirements for electrostatic discharge.
