CTV07RW-21-121PA-P15 vs CTV07RW-19-88PC-P35AD
| Part Number |
|
|
| Category | Circular Connectors | Circular Connectors |
| Manufacturer | Amphenol Aerospace Operations | Amphenol Aerospace Operations |
| Description | CONN RCPT MALE 121POS GOLD SLDR | CONN RCPT MALE 88POS GOLD SLDR |
| Package | - | - |
| Series | MIL-DTL-38999 Series III, Tri-Start? HD | MIL-DTL-38999 Series III, Tri-Start? HD |
| Features | Shielded | Alignment Disc, Shielded |
| Mounting Type | Panel Mount, Bulkhead - Front Side Nut; Through Hole | Panel Mount, Bulkhead - Front Side Nut; Through Hole |
| Termination | Solder | Solder |
| Ingress Protection | Environment Resistant | Environment Resistant |
| Contact Finish | Gold | Gold |
| Orientation | A | C |
| Number of Positions | 121 | 88 |
| Connector Type | Receptacle, Male Pins | Receptacle, Male Pins |
| Shell Size - Insert | 21-121 | 19-88 |
| Fastening Type | Threaded | Threaded |
| Shell Material, Finish | Composite, Olive Drab Cadmium Plated | Composite, Olive Drab Cadmium Plated |
-
1. How to wire a circular connector
1. Insert the wire into the pin hole inside the connector to ensure that the metal conductor is in full contact with the pin.
2. Use wire twisters to tighten the screws or clips on the connector to ensure good and firm contact between the connector and the wire.
3. Check if there is any exposed metal surface on the connector. If necessary, re-strip it.
4. Wrap the connected wires with electrical tape to prevent loosening or short circuit problems. -
2. What are circular connectors used for
Circular connectors are mainly used for power connection, signal transmission, mechanical connection, etc. It is a multifunctional electronic connector widely used in various electronic devices and application scenarios.
-
3. What does s mean in circular connectors sealcon
S-Video, the full name of Separate Video, is also known as SUPER VIDEO. It is a video signal transmission standard used to separate the brightness and color of the video signal to avoid mutual interference between brightness and color when the mixed video signal is output.
-
4. How to remove the circular plastic terminal head
1. Use scissors or flat-nosed pliers to cut off or remove the outer shell on the circular plastic terminal head to expose the internal wiring part.
2. Use a screwdriver to loosen the screws on the terminal head to remove the terminal head.
3. Gently pull the terminal head by hand to remove it from the wire.
4. If the terminal head is very tight, you can use flat-nosed pliers or pliers to increase the removal force.
5. If you need to replace a new terminal head, you can insert the new terminal head into the wire and tighten the screws to ensure that the wiring is firm.
