F921A105MPA vs F920J475MPA
| Part Number |
|
|
| Category | Tantalum Capacitors | Tantalum Capacitors |
| Manufacturer | KYOCERA AVX | KYOCERA AVX |
| Description | CAP TANT 1UF 20% 10V 0805 | CAP TANT 4.7UF 20% 6.3V 0805 |
| Package | Cut Tape (CT) | -Reel® |
| Series | F92 | F92 |
| Type | Molded | Molded |
| Features | General Purpose | General Purpose |
| Operating Temperature | -55°C ~ 125°C | -55°C ~ 125°C |
| Mounting Type | Surface Mount | Surface Mount |
| Package / Case | 0805 (2012 Metric) | 0805 (2012 Metric) |
| Tolerance | ±20% | ±20% |
| Size / Dimension | 0.079" L x 0.049" W (2.00mm x 1.25mm) | 0.079" L x 0.049" W (2.00mm x 1.25mm) |
| Voltage - Rated | 10 V | 6.3 V |
| Lead Spacing | - | - |
| Ratings | - | - |
| Height - Seated (Max) | 0.039\" (1.00mm) | 0.039\" (1.00mm) |
| Capacitance | 1 µF | 4.7 µF |
| ESR (Equivalent Series Resistance) | 12Ohm | 6Ohm |
| Lifetime @ Temp. | - | - |
| Failure Rate | - | - |
| Manufacturer Size Code | P | P |
-
1. When to use tantalum capacitors?
When miniaturization, low ESR (equivalent series resistance), and stable operation over a wide temperature range are required.
Suitable for audio processing, communication equipment, computer motherboards and other fields. -
2. Can I use ceramic capacitors instead of tantalum capacitors?
It depends on the specific situation. If the size, ESR requirements are not high and a specific capacitance value is not required, you can consider replacing it.
But be aware that there are differences in physical properties between the two, and direct replacement may affect the working state of the circuit. -
3. What special precautions must be taken when installing tantalum capacitors?
Ensure the correct polarity connection.
Be careful not to exceed the rated voltage.
Use appropriate fuses or other protective devices to prevent overcurrent.
Consider heat dissipation design to avoid local overheating. -
4. What causes tantalum capacitors to burn out?
Common causes include applying a voltage exceeding the maximum allowable value, excessive current, high ambient temperature, and manufacturing defects.
