INA185A3IDRLT vs MCP6V77-E/MS
| Part Number |
|
|
| Category | Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps | Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps |
| Manufacturer | Texas Instruments | Microchip Technology |
| Description | IC CURR SENSE 1 CIRCUIT SOT563 | IC OPAMP ZERO-DRIFT 2 CIRC 8MSOP |
| Package | Tape & Reel (TR) | Cut Tape (CT) |
| Series | - | Zero-Drift |
| Operating Temperature | -40°C ~ 125°C (TA) | -40°C ~ 125°C (TA) |
| Mounting Type | Surface Mount | Surface Mount |
| Package / Case | SOT-563, SOT-666 | 8-TSSOP, 8-MSOP (0.118\", 3.00mm Width) |
| Supplier Device Package | SOT-563 | 8-MSOP |
| Current - Supply | 200µA | 170µA (x2 Channels) |
| Output Type | Rail-to-Rail | Rail-to-Rail |
| Number of Circuits | 1 | 2 |
| Voltage - Supply, Single/Dual (±) | 2.7V ~ 5.5V | 2V ~ 5.5V |
| Current - Output / Channel | - | 26 mA |
| -3db Bandwidth | - | - |
| Amplifier Type | Current Sense | Zero-Drift |
| Current - Input Bias | 75 µA | 1 pA |
| Voltage - Input Offset | 25 µV | 25 µV |
| Slew Rate | 2V/µs | 1V/µs |
| Gain Bandwidth Product | 150 kHz | 2 MHz |
-
1. What is Common Mode Rejection Ratio (CMRR) and why is it important for instrumentation amplifiers?
CMRR indicates an instrumentation amplifier's ability to suppress common mode signals, with higher values being better. A high CMRR is especially important in noisy environments to ensure that the amplifier primarily amplifies differential signals and is not affected by common mode interference.
-
2. How are operational amplifiers used in filter circuits?
Operational amplifiers can be used to build a variety of active filter circuits, including low-pass, high-pass, band-pass, and band-reject filters, which are commonly used for noise removal and signal conditioning in signal processing.
-
3. What is a Buffer Amp and what is its function?
A Buffer Amp is an amplifier with a unit gain that is mainly used in voltage follower circuits to provide a high input impedance and a low output impedance to isolate the signal source from the load and prevent signal distortion or attenuation.
-
4. What are the application scenarios of buffer amplifiers?
Buffer amplifiers are commonly used in signal isolation, impedance matching, voltage follower and power amplification scenarios, and are suitable for protecting weak signal sources from load effects in signal processing chains.
