JR13RK-5P vs HR24-8DRA-4P(77)
| Part Number |
|
|
| Category | Circular Connectors | Circular Connectors |
| Manufacturer | Hirose Electric Co Ltd | Hirose Electric Co Ltd |
| Description | CONN RCPT 5POS PNL MNT PIN | CONN RCPT 4POS JAM NUT PIN |
| Package | - | - |
| Series | JR | HR24 |
| Mounting Type | Panel Mount, Flange | Panel Mount, Bulkhead - Front Side Nut |
| Termination | Solder Cup | Solder Cup |
| Current Rating | 5A | 3A |
| Voltage - Rated | 250VAC, 350VDC | 125VAC |
| Contact Finish | Silver | Silver |
| Orientation | Keyed | Keyed |
| Number of Positions | 5 | 4 |
| Connector Type | Receptacle, Male Pins | Receptacle, Male Pins |
| Shell Size - Insert | 13 | 8 |
| Fastening Type | Threaded | Threaded |
| Shell Material, Finish | Aluminum Alloy, Nickel Plated | Brass, Nickel Plated |
| Ingress Protection | - | IP67 - Dust Tight, Waterproof |
-
1. What does s mean in circular connectors sealcon
S-Video, the full name of Separate Video, is also known as SUPER VIDEO. It is a video signal transmission standard used to separate the brightness and color of the video signal to avoid mutual interference between brightness and color when the mixed video signal is output.
-
2. What is the circular connector called
Circular connectors are also called circular electrical connectors, sealed circular connectors, aviation plugs, waterproof connectors, etc. Different names for different usage environments: waterproof connectors, waterproof plugs; sealed circular connectors, etc.
-
3. How to remove the circular plastic terminal head
1. Use scissors or flat-nosed pliers to cut off or remove the outer shell on the circular plastic terminal head to expose the internal wiring part.
2. Use a screwdriver to loosen the screws on the terminal head to remove the terminal head.
3. Gently pull the terminal head by hand to remove it from the wire.
4. If the terminal head is very tight, you can use flat-nosed pliers or pliers to increase the removal force.
5. If you need to replace a new terminal head, you can insert the new terminal head into the wire and tighten the screws to ensure that the wiring is firm. -
4. How to remove a circular electrical connector
1. Loosen the locking ring. To remove a circular electrical connector, you first need to loosen the locking ring;
2. Remove the sealant. There is a sealant on the connector, which needs to be removed first.
3. Remove the terminal. First, loosen the terminal fastening or open the slot, and then carefully separate the plug and the socket;
