KJL6T23B53PD vs CIR06F-40B-19P-F80
| Part Number |
|
|
| Category | Circular Connectors | Circular Connectors |
| Manufacturer | ITT Cannon, LLC | ITT Cannon, LLC |
| Description | CIRCULAR | CONN PLUG 19POS STRGHT PIN |
| Package | - | - |
| Series | * | MIL-DTL-5015, CIR |
| Features | - | Cable Clamp |
| Mounting Type | - | Free Hanging (In-Line) |
| Termination | - | Crimp |
| Ingress Protection | - | Environment Proof |
| Current Rating | - | 46A |
| Voltage - Rated | - | 500VAC, 700VDC |
| Contact Finish | - | Silver |
| Orientation | - | N (Normal) |
| Number of Positions | - | 19 |
| Connector Type | - | Plug, Male Pins |
| Shell Size - Insert | - | 40-B19 |
| Fastening Type | - | Bayonet Lock |
| Shell Material, Finish | - | Aluminum Alloy, Olive Drab Cadmium Plated |
-
1. How to cnlinko 4 pin power industrial circular connector
1. Confirm the voltage, current and frequency:
2. Choose the right environment: In normal environment, regular plugs and sockets can be used. IP67 anti-immersion plugs and sockets are used in harsh environment.
3. Pay attention to the installation of the connector: Make sure that the socket used to install the connector on the power supply line has a cover to prevent electric shock.
4. Check the connector status: Before use, check whether the model, code, number, plug position and direction of the connector meet the requirements of the design and process documents. 5. Correct plugging and unplugging operation: Before plugging, check whether the code, interface, etc. of the plug to be plugged in correspond to the socket, and accurately position them. -
2. How to wire a circular connector
1. Insert the wire into the pin hole inside the connector to ensure that the metal conductor is in full contact with the pin.
2. Use wire twisters to tighten the screws or clips on the connector to ensure good and firm contact between the connector and the wire.
3. Check if there is any exposed metal surface on the connector. If necessary, re-strip it.
4. Wrap the connected wires with electrical tape to prevent loosening or short circuit problems. -
3. What are circular connectors used for
Circular connectors are mainly used for power connection, signal transmission, mechanical connection, etc. It is a multifunctional electronic connector widely used in various electronic devices and application scenarios.
-
4. What are the materials of circular connectors?
1. Metal: It has good mechanical properties and conductivity, and is used for contacts and housings.
2. Plastic: Lightweight, good insulation, and able to resist corrosion by some chemicals, used for insulators and housings.
3. Rubber: Has good elasticity and corrosion resistance, used for waterproofing and sealing.
