LMH6401IRMZT vs HMC788ALP2E
| Part Number |
|
|
| Category | RF Amplifiers | RF Amplifiers |
| Manufacturer | Texas Instruments | Analog Devices Inc. |
| Description | IC OPAMP VGA 1 CIRCUIT 16UQFN | IC MMIC AMP GAIN 10GHZ 6DFN |
| Package | Cut Tape (CT) | 6-TDFN Exposed Pad |
| Series | - | - |
| Operating Temperature | -40°C ~ 85°C | - |
| Mounting Type | Surface Mount | - |
| Package / Case | 16-UFQFN | 6-VDFN Exposed Pad |
| Supplier Device Package | 16-UQFN (3x3) | 6-LFCSP (2x2) |
| Current - Supply | 69mA | 76mA |
| Output Type | Differential | - |
| Number of Circuits | 1 | - |
| Voltage - Supply, Single/Dual (±) | 4V ~ 5.25V | - |
| Current - Output / Channel | - | - |
| -3db Bandwidth | 4.5 GHz | - |
| Amplifier Type | Variable Gain | - |
| Current - Input Bias | - | - |
| Voltage - Input Offset | - | - |
| Slew Rate | 18200V/µs | - |
| Gain Bandwidth Product | 500 MHz | - |
| Voltage - Supply | - | 5V |
| Frequency | - | 0Hz ~ 10GHz |
| P1dB | - | 18dBm |
| Gain | - | 12dB |
| Noise Figure | - | 7dB |
| RF Type | - | LTE, WiMax |
| Test Frequency | - | 6GHz ~ 10GHz |
-
1. What are the main types of RF amplifiers?
Common types include low-noise amplifiers (LNAs), power amplifiers, variable gain amplifiers (VGAs), and high-linearity amplifiers, each designed for specific tasks like minimizing noise, maximizing power, or ensuring signal clarity.
-
2. How is an RF amplifier's gain measured?
Gain is typically expressed in decibels (dB) and represents the ratio of output to input signal strength. It is a key performance metric for RF amplifiers.
-
3. What factors should be considered when selecting an RF amplifier?
Important considerations include gain, noise figure, bandwidth, linearity, efficiency, and the specific application requirements.
-
4. What are Doherty amplifiers, and where are they used?
Doherty amplifiers are specialized power amplifiers that enhance efficiency for signals with high peak-to-average power ratios, often used in modern communication systems.
