M39003/01-6117/TR vs M39003/01-6064/TR
| Part Number |
|
|
| Category | Tantalum Capacitors | Tantalum Capacitors |
| Manufacturer | Vishay Sprague | Vishay Sprague |
| Description | CAP TANT 33UF 20% 35V AXIAL | CAP TANT 150UF 20% 15V AXIAL |
| Package | Tape & Reel (TR) | Tape & Reel (TR) |
| Series | Military, MIL-PRF-39003/1, CSR13 | Military, MIL-PRF-39003/1, CSR13 |
| Type | Hermetically Sealed | Hermetically Sealed |
| Features | High Reliability | High Reliability |
| Operating Temperature | -55°C ~ 125°C | -55°C ~ 125°C |
| Mounting Type | Through Hole | Through Hole |
| Package / Case | Axial | Axial |
| Tolerance | ±20% | ±20% |
| Size / Dimension | 0.351" Dia x 0.786" L (8.92mm x 19.96mm) | 0.351" Dia x 0.786" L (8.92mm x 19.96mm) |
| Voltage - Rated | 35 V | 15 V |
| Lead Spacing | - | - |
| Ratings | - | - |
| Height - Seated (Max) | - | - |
| Capacitance | 33 µF | 150 µF |
| ESR (Equivalent Series Resistance) | - | - |
| Lifetime @ Temp. | - | - |
| Failure Rate | B (0.1%) | B (0.1%) |
| Manufacturer Size Code | D | D |
-
1. Difference between ordinary capacitors and tantalum capacitors
Material: Ordinary capacitors can be aluminum electrolytic capacitors, ceramic capacitors, etc.; while tantalum capacitors use metal tantalum as anode material.
Performance: Generally, tantalum capacitors have better temperature stability and higher capacity-to-volume ratio.
Application range: Due to its performance characteristics, tantalum capacitors are often used in miniaturized electronic products that require high reliability. -
2. What is the expected life of tantalum capacitors?
Under normal circumstances, it can range from thousands of hours to tens of thousands of hours, depending on the working conditions and manufacturer specifications.
-
3. When to use tantalum capacitors?
When miniaturization, low ESR (equivalent series resistance), and stable operation over a wide temperature range are required.
Suitable for audio processing, communication equipment, computer motherboards and other fields. -
4. Can I use ceramic capacitors instead of tantalum capacitors?
It depends on the specific situation. If the size, ESR requirements are not high and a specific capacitance value is not required, you can consider replacing it.
But be aware that there are differences in physical properties between the two, and direct replacement may affect the working state of the circuit.
