MAX4175BKEUK vs INA185A4IDRLT
| Part Number |
|
|
| Category | Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps | Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps |
| Manufacturer | Maxim Integrated | Texas Instruments |
| Description | GAINAMP/OPEN-LOOP OP AMP | IC CURR SENSE 1 CIRCUIT SOT563 |
| Package | Bulk | Cut Tape (CT) |
| Series | - | - |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 125°C (TA) |
| Mounting Type | Surface Mount | Surface Mount |
| Package / Case | SC-74A, SOT-753 | SOT-563, SOT-666 |
| Supplier Device Package | SOT-23-5 | SOT-563 |
| Current - Supply | 355µA | 200µA |
| Output Type | Rail-to-Rail | Rail-to-Rail |
| Number of Circuits | 1 | 1 |
| Voltage - Supply, Single/Dual (±) | 2.5V ~ 5.5V, ±1.25V ~ 2.75V | 2.7V ~ 5.5V |
| Current - Output / Channel | 65 mA | - |
| -3db Bandwidth | 330 kHz | - |
| Amplifier Type | General Purpose | Current Sense |
| Current - Input Bias | 50 pA | 75 µA |
| Voltage - Input Offset | 500 µV | 25 µV |
| Slew Rate | 0.7V/µs | 2V/µs |
| Gain Bandwidth Product | 2 MHz | 105 kHz |
-
1. What is Common Mode Rejection Ratio (CMRR) and why is it important for instrumentation amplifiers?
CMRR indicates an instrumentation amplifier's ability to suppress common mode signals, with higher values being better. A high CMRR is especially important in noisy environments to ensure that the amplifier primarily amplifies differential signals and is not affected by common mode interference.
-
2. What is a gain adjustable instrumentation amplifier?
Gain-adjustable instrumentation amplifiers allow the gain to be adjusted by external resistors or digital controls to accommodate the dynamic range of different signal sources. These amplifiers are commonly used in a variety of sensor systems.
-
3. How can I reduce noise in operational amplifier circuits?
Noise can be reduced by selecting low-noise operational amplifiers, optimizing circuit layout, reducing power supply ripple, using appropriate decoupling capacitors, and adding filters where necessary.
-
4. What is a Buffer Amp and what is its function?
A Buffer Amp is an amplifier with a unit gain that is mainly used in voltage follower circuits to provide a high input impedance and a low output impedance to isolate the signal source from the load and prevent signal distortion or attenuation.
