MAX5900ABEUT+T vs SC4150HISTRT
| Part Number |
|
|
| Category | PMIC - Hot Swap Controllers | PMIC - Hot Swap Controllers |
| Manufacturer | Maxim Integrated | Semtech Corporation |
| Description | IC HOT SWAP CTRLR -48V SOT23-6 | IC HOT SWAP CTRLR -48V 8SO |
| Package | Tape & Reel (TR) | Tape & Reel (TR) |
| Series | Simple Swapper™ | - |
| Type | Hot Swap Controller | Hot Swap Controller |
| Features | Auto Retry, Fault Timeout, Thermal Limit | Auto Retry, Fault Timeout |
| Voltage - Supply | -100V ~ -9V | 10V ~ 80V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 125°C |
| Mounting Type | Surface Mount | Surface Mount |
| Package / Case | SOT-23-6 | 8-SOIC (0.154\", 3.90mm Width) |
| Supplier Device Package | SOT-6 | 8-SO |
| Current - Supply | 500 µA | 4 mA |
| Applications | -48V | -48V |
| Current - Output (Max) | - | - |
| Number of Channels | 1 | 1 |
| Internal Switch(s) | No | No |
| Programmable Features | UVLO | OVP, Slew Rate, UVLO |
-
1. How to choose a suitable hot-swap controller?
When selecting a hot-swap controller, you should consider the system's current and voltage range, protection mechanisms (such as overcurrent protection and thermal shutdown), response time, power dissipation, and other required functions.
-
2. How do hot-swap controllers prevent inrush current?
Through internal current limiting circuits, hot-swap controllers control the rate of current increase at the moment of insertion to avoid damage to the system due to instantaneous inrush current. At the same time, the settable soft start function helps to load the voltage smoothly.
-
3. Can the current limit value of the hot-swap controller be adjusted?
Yes, many hot-swap controllers allow users to adjust the current limit value through external resistors or programming interfaces to adapt to different load requirements and circuit conditions.
-
4. How to test the performance of hot-swap controllers?
Performance tests can include plug-in tests, current limiting tests, protection function verification, and current surge measurements. Using an oscilloscope to observe the current and voltage changes at the moment of plug-in is an effective way to verify its performance.
