MCP6V77-E/MS vs INA185A4IDRLT
| Part Number |
|
|
| Category | Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps | Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps |
| Manufacturer | Microchip Technology | Texas Instruments |
| Description | IC OPAMP ZERO-DRIFT 2 CIRC 8MSOP | IC CURR SENSE 1 CIRCUIT SOT563 |
| Package | Cut Tape (CT) | Cut Tape (CT) |
| Series | Zero-Drift | - |
| Operating Temperature | -40°C ~ 125°C (TA) | -40°C ~ 125°C (TA) |
| Mounting Type | Surface Mount | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118\", 3.00mm Width) | SOT-563, SOT-666 |
| Supplier Device Package | 8-MSOP | SOT-563 |
| Current - Supply | 170µA (x2 Channels) | 200µA |
| Output Type | Rail-to-Rail | Rail-to-Rail |
| Number of Circuits | 2 | 1 |
| Voltage - Supply, Single/Dual (±) | 2V ~ 5.5V | 2.7V ~ 5.5V |
| Current - Output / Channel | 26 mA | - |
| -3db Bandwidth | - | - |
| Amplifier Type | Zero-Drift | Current Sense |
| Current - Input Bias | 1 pA | 75 µA |
| Voltage - Input Offset | 25 µV | 25 µV |
| Slew Rate | 1V/µs | 2V/µs |
| Gain Bandwidth Product | 2 MHz | 105 kHz |
-
1. What is the difference between an instrumentation amplifier and an operational amplifier?
Instrumentation amplifiers integrate multi-stage operational amplifiers for precise amplification of differential signals, while operational amplifiers are more versatile and can perform a wide range of analog signal processing tasks. Instrumentation amplifiers have higher input impedance and better common mode rejection.
-
2. How to choose the right instrumentation amplifier?
The input common-mode voltage range, gain-bandwidth product, noise performance, power consumption, temperature drift, and common-mode rejection ratio (CMRR) should be considered when selecting an instrumentation amplifier to ensure that it meets the accuracy requirements of a particular application.
-
3. What is Common Mode Rejection Ratio (CMRR) and why is it important for instrumentation amplifiers?
CMRR indicates an instrumentation amplifier's ability to suppress common mode signals, with higher values being better. A high CMRR is especially important in noisy environments to ensure that the amplifier primarily amplifies differential signals and is not affected by common mode interference.
-
4. What are the application scenarios of buffer amplifiers?
Buffer amplifiers are commonly used in signal isolation, impedance matching, voltage follower and power amplification scenarios, and are suitable for protecting weak signal sources from load effects in signal processing chains.
