MS17344R22N19S vs FGG.4B.348.CLAD16
| Part Number |
|
|
| Category | Circular Connectors | Circular Connectors |
| Manufacturer | Amphenol Industrial Operations | LEMO |
| Description | CONN PLUG 14POS INLINE SKT | CONN INLINE PLUG 48PIN SLD CUP |
| Package | - | - |
| Series | Military, MIL-DTL-22992 | 4B |
| Mounting Type | Free Hanging (In-Line) | Free Hanging (In-Line) |
| Termination | Solder Cup | Solder Cup |
| Ingress Protection | Waterproof | IP50 - Dust Protected |
| Voltage - Rated | 500VAC, 700VDC | - |
| Contact Finish | Silver | Gold |
| Orientation | N (Normal) | G |
| Number of Positions | 14 | 48 |
| Connector Type | Plug, Female Sockets | Plug, Male Pins |
| Shell Size - Insert | 22-19 | 348 |
| Fastening Type | Threaded | Push-Pull, Detent Lock |
| Shell Material, Finish | Aluminum, Anodic Coating (Alumilite) | Brass, Chrome Plated |
| Features | - | Shielded |
| Current Rating | - | 1.5A |
-
1. How to solder a circular connector
1. Remove the insulator, prepare the soldering iron and needle-nosed pliers or tweezers;
2. Place the blade of the soldering iron tip close to the solder joint, and keep the soldering iron at an angle of about 60° to the horizontal plane so that the molten tin can flow smoothly from the soldering iron tip to the solder joint. The time the soldering iron tip stays at the solder joint should be controlled to 1-2 seconds;
3. Make sure that the insulator is not burned, the tin on the solder joint is smooth, burr-free, and there is no cold solder joint, and the definition of the solder wire meets the requirements of the drawing. -
2. What are circular connectors used for
Circular connectors are mainly used for power connection, signal transmission, mechanical connection, etc. It is a multifunctional electronic connector widely used in various electronic devices and application scenarios.
-
3. How to remove a circular electrical connector
1. Loosen the locking ring. To remove a circular electrical connector, you first need to loosen the locking ring;
2. Remove the sealant. There is a sealant on the connector, which needs to be removed first.
3. Remove the terminal. First, loosen the terminal fastening or open the slot, and then carefully separate the plug and the socket; -
4. What are the materials of circular connectors?
1. Metal: It has good mechanical properties and conductivity, and is used for contacts and housings.
2. Plastic: Lightweight, good insulation, and able to resist corrosion by some chemicals, used for insulators and housings.
3. Rubber: Has good elasticity and corrosion resistance, used for waterproofing and sealing.
