QG7F vs MS3100E24-11P
| Part Number |
|
|
| Category | Circular Connectors | Circular Connectors |
| Manufacturer | Switchcraft Inc. | ITT Cannon, LLC |
| Description | CONN INSERT 7POS FMALE STD LATCH | CONN RCPT 9POS WALL MNT W/PINS |
| Package | - | - |
| Series | Q-G? | Military, MIL-DTL-5015, MS |
| Features | Insert Only, Requires Shell | Strain Relief |
| Termination | Solder | Solder Cup |
| Orientation | Keyed | N (Normal) |
| Number of Positions | 7 | 9 |
| Connector Type | Insert, Female Sockets | Receptacle, Male Pins |
| Shell Size - Insert | XLR | 24-11 |
| Fastening Type | Latch Lock | Threaded |
| Mounting Type | - | Panel Mount, Flange |
| Ingress Protection | - | Environment Resistant |
| Current Rating | - | 41A, 74A |
| Voltage - Rated | - | 500VAC, 700VDC |
| Contact Finish | - | Silver |
| Shell Material, Finish | - | Aluminum Alloy, Olive Drab Cadmium Plated |
-
1. What is a circular connector
A circular connector is a cylindrical electronic connector with a circular mating surface. It belongs to the fifth category of the interconnection classification and is mainly used for interconnection between devices. The design of circular connectors includes many types, such as low-frequency circular connectors, RF coaxial connectors and audio connectors, etc., with a wide operating temperature range from -55℃ to +150℃.
-
2. How to remove the circular plastic terminal head
1. Use scissors or flat-nosed pliers to cut off or remove the outer shell on the circular plastic terminal head to expose the internal wiring part.
2. Use a screwdriver to loosen the screws on the terminal head to remove the terminal head.
3. Gently pull the terminal head by hand to remove it from the wire.
4. If the terminal head is very tight, you can use flat-nosed pliers or pliers to increase the removal force.
5. If you need to replace a new terminal head, you can insert the new terminal head into the wire and tighten the screws to ensure that the wiring is firm. -
3. How to remove a circular electrical connector
1. Loosen the locking ring. To remove a circular electrical connector, you first need to loosen the locking ring;
2. Remove the sealant. There is a sealant on the connector, which needs to be removed first.
3. Remove the terminal. First, loosen the terminal fastening or open the slot, and then carefully separate the plug and the socket; -
4. How many types of connectors are there?
1. Circular connector,
2. RF connector,
3. Rectangular connector:
4. SMB connector:
5. BNC connector;
