QS3VH16244PAG8 vs SN74CBTS16212DGGR
| Part Number |
|
|
| Category | Logic - Signal Switches, Multiplexers, Decoders | Logic - Signal Switches, Multiplexers, Decoders |
| Manufacturer | Renesas Electronics America Inc | Texas Instruments |
| Description | IC BUS SWITCH 4 X 1:1 48TSSOP | IC BUS FET EXC SW 12X2:2 56TSSOP |
| Package | Cut Tape (CT) | Cut Tape (CT) |
| Series | 3VH | 74CBTS |
| Type | Bus Switch | Bus FET Exchange Switch |
| Voltage - Supply | 2.3V ~ 3.6V | 4.5V ~ 5.5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
| Package / Case | 48-TFSOP (0.240\", 6.10mm Width) | 56-TFSOP (0.240\", 6.10mm Width) |
| Supplier Device Package | 48-TSSOP | 56-TSSOP |
| Voltage Supply Source | Single Supply | Single Supply |
| Circuit | 4 x 1:1 | 12 x 2:2 |
| Current - Output High, Low | - | - |
| Independent Circuits | 4 | 1 |
-
1. How does a signal switch work?
When a signal switch is activated, it changes the path of the signal. In simple mechanical switches, this usually means connecting or disconnecting between physical contact points. For electronic switches, such as MOSFETs or BJTs, the on and off states are controlled by applying voltage or current to achieve the conduction or blocking of signals.
-
2. What is the difference between power switches and signal switches?
The difference between power switches and signal switches is mainly the energy level they handle. Power switches are designed to carry larger currents and powers, and are usually used to directly control power supplies; while signal switches handle smaller currents and are mainly used to control logic levels or routing of small signals.
-
3. What is the purpose of a decoder in a combinational circuit?
The purpose of decoders in combinational circuits is mainly to convert data or to implement specific functions as part of logic circuits.
-
4. Is a decoder a transmitter or a receiver?
A decoder is neither a transmitter nor a receiver, but is located between the two to process received data or prepare data to be sent.
