RPC2-12RB-3P(72) vs 42-01005
| Part Number |
|
|
| Category | Circular Connectors | Circular Connectors |
| Manufacturer | Hirose Electric Co Ltd | Conec |
| Description | CONN RCPT 3POS PNL MNT PIN | CONN RCPT 3POS PNL MNT PIN M8 |
| Package | - | - |
| Series | RP | 42 |
| Mounting Type | Panel Mount, Flange | Panel Mount |
| Termination | Solder Cup | Solder Cup |
| Current Rating | 5A | 3A |
| Contact Finish | Silver | Gold |
| Number of Positions | 3 | 3 |
| Connector Type | Receptacle, Male Pins | Receptacle, Male Pins |
| Shell Size - Insert | 12 | M8-3 |
| Fastening Type | Push-Pull | Push-Pull |
| Shell Material, Finish | Polyamide Resin and Polyacetal Resin | Plastic |
| Features | - | Translucent |
| Ingress Protection | - | IP67 - Dust Tight, Waterproof |
| Voltage - Rated | - | 60V |
| Orientation | - | A |
-
1. How to cnlinko 4 pin power industrial circular connector
1. Confirm the voltage, current and frequency:
2. Choose the right environment: In normal environment, regular plugs and sockets can be used. IP67 anti-immersion plugs and sockets are used in harsh environment.
3. Pay attention to the installation of the connector: Make sure that the socket used to install the connector on the power supply line has a cover to prevent electric shock.
4. Check the connector status: Before use, check whether the model, code, number, plug position and direction of the connector meet the requirements of the design and process documents. 5. Correct plugging and unplugging operation: Before plugging, check whether the code, interface, etc. of the plug to be plugged in correspond to the socket, and accurately position them. -
2. How to wire a circular connector
1. Insert the wire into the pin hole inside the connector to ensure that the metal conductor is in full contact with the pin.
2. Use wire twisters to tighten the screws or clips on the connector to ensure good and firm contact between the connector and the wire.
3. Check if there is any exposed metal surface on the connector. If necessary, re-strip it.
4. Wrap the connected wires with electrical tape to prevent loosening or short circuit problems. -
3. What is a circular connector
A circular connector is a cylindrical electronic connector with a circular mating surface. It belongs to the fifth category of the interconnection classification and is mainly used for interconnection between devices. The design of circular connectors includes many types, such as low-frequency circular connectors, RF coaxial connectors and audio connectors, etc., with a wide operating temperature range from -55℃ to +150℃.
-
4. How to remove a circular electrical connector
1. Loosen the locking ring. To remove a circular electrical connector, you first need to loosen the locking ring;
2. Remove the sealant. There is a sealant on the connector, which needs to be removed first.
3. Remove the terminal. First, loosen the terminal fastening or open the slot, and then carefully separate the plug and the socket;
