SS10P3HM3_A/I vs SS10P4HM3_A/I
| Part Number |
|
|
| Category | Diodes - Rectifiers - Single | Diodes - Rectifiers - Single |
| Manufacturer | Vishay Semiconductor - Diodes Division | Vishay Semiconductor - Diodes Division |
| Description | DIODE SCHOTTKY 30V 10A TO277A | DIODE SCHOTTKY 40V 10A TO277A |
| Package | Tape & Reel (TR) | Tape & Reel (TR) |
| Series | Automotive, AEC-Q101 | Automotive, AEC-Q101 |
| Mounting Type | Surface Mount | Surface Mount |
| Package / Case | TO-277, 3-PowerDFN | TO-277, 3-PowerDFN |
| Supplier Device Package | TO-277A (SMPC) | TO-277A (SMPC) |
| Diode Type | Schottky | Schottky |
| Current - Average Rectified (Io) | 10A | 10A |
| Voltage - Forward (Vf) (Max) @ If | 560 mV @ 10 A | 560 mV @ 10 A |
| Current - Reverse Leakage @ Vr | 800 µA @ 30 V | 800 µA @ 40 V |
| Capacitance @ Vr, F | 750pF @ 4V, 1MHz | 750pF @ 4V, 1MHz |
| Voltage - DC Reverse (Vr) (Max) | 30 V | 40 V |
| Speed | Fast Recovery =< 500ns, > 200mA (Io) | Fast Recovery =< 500ns, > 200mA (Io) |
| Reverse Recovery Time (trr) | - | - |
| Operating Temperature - Junction | -55°C ~ 150°C | -55°C ~ 150°C |
-
1. What is the difference between a single rectifier diode and a bridge rectifier?
A single rectifier diode can only rectify the positive half wave of AC power (half wave rectification), while a bridge rectifier composed of four diodes can rectify the positive and negative half waves of AC power (full wave rectification), with higher efficiency and smoother output.
-
2. How to identify the polarity of a single rectifier diode?
Rectifying diodes usually have polarity markings, with the positive (anode) of the diode being "+" and the negative (cathode) being "-". On the packaging of diodes, there is usually a circular mark on the cathode side indicating the direction of the diode.
-
3. How to determine if the rectifier diode is damaged?
Use a multimeter to measure the forward and reverse resistance of a diode. If the diode exhibits low impedance or high impedance in both directions, it may have been damaged. Under normal circumstances, there should be low impedance when conducting in the forward direction, and high impedance when conducting in the reverse direction.
-
4. What are the packaging types of rectifier diodes?
There are various packaging types for rectifier diodes, including axial pin packaging (such as DO-41), surface mount packaging (such as SMA, SMB), and high-power packaging (such as TO-220). When selecting, the appropriate packaging should be chosen based on the application's heat dissipation requirements and installation method.
