T4111402041-000 vs T 3431 500
| Part Number |
|
|
| Category | Circular Connectors | Circular Connectors |
| Manufacturer | TE Connectivity AMP Connectors | Amphenol Sine Systems Corp |
| Description | CONN PLUG MALE 4POS SCREW GOLD | CONN RCPT 7POS SNAP-IN SKT |
| Package | - | - |
| Series | M12 | C 091 B |
| Features | Backshell | - |
| Mounting Type | Free Hanging (In-Line) | Panel Mount, Snap-In |
| Termination | Screw | Solder Cup |
| Ingress Protection | IP67 - Dust Tight, Waterproof | IP40 |
| Current Rating | 4A | 7A |
| Voltage - Rated | 250V | 250V |
| Contact Finish | Gold | Silver |
| Orientation | B | Keyed |
| Number of Positions | 4 | 7 |
| Connector Type | Plug, Male Pins | Receptacle, Female Sockets |
| Shell Size - Insert | M12-4 | DIN |
| Fastening Type | Threaded | Bayonet Lock |
| Shell Material, Finish | Brass | Plastic |
-
1. How to wire a circular connector
1. Insert the wire into the pin hole inside the connector to ensure that the metal conductor is in full contact with the pin.
2. Use wire twisters to tighten the screws or clips on the connector to ensure good and firm contact between the connector and the wire.
3. Check if there is any exposed metal surface on the connector. If necessary, re-strip it.
4. Wrap the connected wires with electrical tape to prevent loosening or short circuit problems. -
2. What are circular connectors used for
Circular connectors are mainly used for power connection, signal transmission, mechanical connection, etc. It is a multifunctional electronic connector widely used in various electronic devices and application scenarios.
-
3. What is the circular connector called
Circular connectors are also called circular electrical connectors, sealed circular connectors, aviation plugs, waterproof connectors, etc. Different names for different usage environments: waterproof connectors, waterproof plugs; sealed circular connectors, etc.
-
4. What are the materials of circular connectors?
1. Metal: It has good mechanical properties and conductivity, and is used for contacts and housings.
2. Plastic: Lightweight, good insulation, and able to resist corrosion by some chemicals, used for insulators and housings.
3. Rubber: Has good elasticity and corrosion resistance, used for waterproofing and sealing.
