T491A335K006AT vs T540D337K006CH8510
| Part Number |
|
|
| Category | Tantalum Capacitors | Tantalum - Polymer Capacitors |
| Manufacturer | KEMET | KEMET |
| Description | CAP TANT 3.3UF 10% 6.3V 1206 | CAP TANT POLY 330UF 6.3V 2917 |
| Package | Tape & Reel (TR) | Tape & Reel (TR) |
| Series | T491 | KO-CAP® T540 |
| Type | Molded | Molded |
| Features | General Purpose | High Reliability |
| Operating Temperature | -55°C ~ 125°C | -55°C ~ 125°C |
| Mounting Type | Surface Mount | Surface Mount |
| Package / Case | 1206 (3216 Metric) | 2917 (7343 Metric) |
| Tolerance | ±10% | ±10% |
| Size / Dimension | 0.126" L x 0.063" W (3.20mm x 1.60mm) | 0.287" L x 0.169" W (7.30mm x 4.30mm) |
| Voltage - Rated | 6.3 V | 6.3 V |
| Lead Spacing | - | - |
| Ratings | - | COTS |
| Height - Seated (Max) | 0.071\" (1.80mm) | 0.122\" (3.10mm) |
| Capacitance | 3.3 µF | 330 µF |
| ESR (Equivalent Series Resistance) | 8Ohm | 40mOhm @ 100kHz |
| Lifetime @ Temp. | 2000 Hrs @ 125°C | 2000 Hrs @ 125°C |
| Failure Rate | - | - |
| Manufacturer Size Code | A | D |
-
1. Disadvantages of tantalum capacitors
The price is relatively high.
If used improperly or the circuit design is defective, it may fail, including explosion.
It is polarity sensitive and can only work in the specified direction.
It may fail easily under certain conditions (such as overvoltage, surge current). -
2. Difference between ordinary capacitors and tantalum capacitors
Material: Ordinary capacitors can be aluminum electrolytic capacitors, ceramic capacitors, etc.; while tantalum capacitors use metal tantalum as anode material.
Performance: Generally, tantalum capacitors have better temperature stability and higher capacity-to-volume ratio.
Application range: Due to its performance characteristics, tantalum capacitors are often used in miniaturized electronic products that require high reliability. -
3. Can I use ceramic capacitors instead of tantalum capacitors?
It depends on the specific situation. If the size, ESR requirements are not high and a specific capacitance value is not required, you can consider replacing it.
But be aware that there are differences in physical properties between the two, and direct replacement may affect the working state of the circuit. -
4. What causes tantalum capacitors to burn out?
Common causes include applying a voltage exceeding the maximum allowable value, excessive current, high ambient temperature, and manufacturing defects.
