TLE2237CDW vs RC4157M
| Part Number |
|
|
| Category | Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps | Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps |
| Manufacturer | Texas Instruments | Fairchild Semiconductor |
| Description | OPERATIONAL AMPLIFIER | OPERATIONAL AMPLIFIER |
| Package | Bulk | Bulk |
| Series | Excalibur™ | - |
| Operating Temperature | 0°C ~ 70°C (TA) | 0°C ~ 70°C |
| Mounting Type | Surface Mount | Surface Mount |
| Package / Case | 16-SOIC (0.295\", 7.50mm Width) | 14-SOIC (0.154\", 3.90mm Width) |
| Supplier Device Package | 16-SOIC | 14-SOIC |
| Current - Supply | 7.3mA (x2 Channels) | 5mA |
| Output Type | - | - |
| Number of Circuits | 2 | 4 |
| Voltage - Supply, Single/Dual (±) | ±4V ~ 19V | 20V |
| Current - Output / Channel | 50 mA | 25 mA |
| -3db Bandwidth | - | - |
| Amplifier Type | General Purpose | General Purpose |
| Current - Input Bias | 15 nA | 60 nA |
| Voltage - Input Offset | 100 µV | 1 mV |
| Slew Rate | 5V/µs | 1.6V/µs |
| Gain Bandwidth Product | 50 MHz | 19 MHz |
-
1. How is the noise performance of instrumentation amplifiers optimized?
Select low-noise amplifiers in your design and use shielding, filters, and precise power management to minimize external noise. High-quality resistors should be used wherever possible and PCB layout should be optimized to reduce noise coupling.
-
2. What is a gain adjustable instrumentation amplifier?
Gain-adjustable instrumentation amplifiers allow the gain to be adjusted by external resistors or digital controls to accommodate the dynamic range of different signal sources. These amplifiers are commonly used in a variety of sensor systems.
-
3. How to achieve high accuracy and low drift in instrumentation amplifiers?
Select an amplifier with low bias current, low offset voltage, and low noise, and reduce the effect of temperature drift on accuracy through a stable power supply and proper temperature compensation circuit design.
-
4. What are the main application scenarios of Op Amps?
Operational amplifiers are widely used in signal conditioning, voltage follower, filter, comparator, integrator, differentiator, precision level shifter and other circuits, which are widely used in consumer electronics, industrial automation, and instrumentation.
