TLV2186IDSGT vs TLE2237CDW
| Part Number |
|
|
| Category | Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps | Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps |
| Manufacturer | Texas Instruments | Texas Instruments |
| Description | LOW POWER, RAIL-TO-RAIL INPUT AN | OPERATIONAL AMPLIFIER |
| Package | Cut Tape (CT) | Bulk |
| Series | Zero-Drift | Excalibur™ |
| Operating Temperature | -40°C ~ 125°C (TA) | 0°C ~ 70°C (TA) |
| Mounting Type | Surface Mount | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad | 16-SOIC (0.295\", 7.50mm Width) |
| Supplier Device Package | 8-WSON (2x2) | 16-SOIC |
| Current - Supply | 90µA | 7.3mA (x2 Channels) |
| Output Type | Rail-to-Rail | - |
| Number of Circuits | 2 | 2 |
| Voltage - Supply, Single/Dual (±) | 4.5V ~ 24V, ±2.25V ~ 12V | ±4V ~ 19V |
| Current - Output / Channel | 20 mA | 50 mA |
| -3db Bandwidth | - | - |
| Amplifier Type | Zero-Drift | General Purpose |
| Current - Input Bias | 100 pA | 15 nA |
| Voltage - Input Offset | 10 µV | 100 µV |
| Slew Rate | 0.35V/µs | 5V/µs |
| Gain Bandwidth Product | 750 kHz | 50 MHz |
-
1. What is an instrumentation amplifier and what is it mainly used for?
An instrumentation amplifier is a high-precision amplifier designed to amplify low-level differential signals with high input impedance and high common mode rejection ratio (CMRR), and is commonly used in scenarios such as medical equipment, sensor signal processing, and industrial measurements.
-
2. What is the difference between an instrumentation amplifier and an operational amplifier?
Instrumentation amplifiers integrate multi-stage operational amplifiers for precise amplification of differential signals, while operational amplifiers are more versatile and can perform a wide range of analog signal processing tasks. Instrumentation amplifiers have higher input impedance and better common mode rejection.
-
3. What are the main application scenarios of Op Amps?
Operational amplifiers are widely used in signal conditioning, voltage follower, filter, comparator, integrator, differentiator, precision level shifter and other circuits, which are widely used in consumer electronics, industrial automation, and instrumentation.
-
4. What is a rail-to-rail operational amplifier and what are its advantages?
Rail-to-rail op amps are capable of extending the output voltage range to the limit of the supply voltage (i.e., the “rail”), allowing them to handle large dynamic range signals even at low supply voltages, making them particularly suitable for low-voltage power supply systems and portable devices.
