TPS2391DGKRG4 vs LM5067MWX-1/NOPB
| Part Number |
|
|
| Category | PMIC - Hot Swap Controllers | PMIC - Hot Swap Controllers |
| Manufacturer | Texas Instruments | National Semiconductor |
| Description | IC HOT SWAP CTRLR -48V 8VSSOP | LM5067 NEGATIVE HOT SWAP / INRUS |
| Package | -Reel® | Bulk |
| Series | - | - |
| Type | Hot Swap Controller | Hot Swap Controller |
| Features | Auto Retry, UVLO | Latched Fault |
| Voltage - Supply | -80V ~ -36V | -80V ~ -9V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 125°C |
| Mounting Type | Surface Mount | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118\", 3.00mm Width) | 14-SOIC (0.295\", 7.50mm Width) |
| Supplier Device Package | 8-VSSOP | 14-SOIC |
| Current - Supply | 700 µA | 2 mA |
| Applications | -48V | -48V |
| Current - Output (Max) | - | - |
| Number of Channels | 1 | 1 |
| Internal Switch(s) | No | No |
| Programmable Features | Current Limit, Fault Timeout, Slew Rate | Circuit Breaker, Current Limit, Fault Timeout, OVP, UVLO |
-
1. What is the difference between a hot-swap controller and a power switch?
Hot-swap controllers actively manage current and voltage changes during the plug-in process, while ordinary power switches only have simple on-off functions and cannot provide protection and control functions.
-
2. How do hot-swap controllers prevent inrush current?
Through internal current limiting circuits, hot-swap controllers control the rate of current increase at the moment of insertion to avoid damage to the system due to instantaneous inrush current. At the same time, the settable soft start function helps to load the voltage smoothly.
-
3. What are the common protection functions of hot-swap controllers?
Typical protection functions include overcurrent protection, short-circuit protection, overvoltage protection, undervoltage lockout, overtemperature protection, etc. These protection functions ensure the safety of equipment under different conditions.
-
4. What voltage ranges do PMIC hot-swap controllers support?
Hot-swap controllers support voltage ranges from low voltage (such as 5V) to high voltage (such as 48V or even higher), depending on the model and application scenario of the controller.
