TPS2391DGKRG4 vs TPS2399DGKR
| Part Number |
|
|
| Category | PMIC - Hot Swap Controllers | PMIC - Hot Swap Controllers |
| Manufacturer | Texas Instruments | Texas Instruments |
| Description | IC HOT SWAP CTRLR -48V 8VSSOP | IC HOT SWAP CTRLR -48V 8VSSOP |
| Package | -Reel® | Tape & Reel (TR) |
| Series | - | - |
| Type | Hot Swap Controller | Hot Swap Controller |
| Features | Auto Retry, UVLO | Auto Retry, UVLO |
| Voltage - Supply | -80V ~ -36V | -80V ~ -36V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118\", 3.00mm Width) | 8-TSSOP, 8-MSOP (0.118\", 3.00mm Width) |
| Supplier Device Package | 8-VSSOP | 8-VSSOP |
| Current - Supply | 700 µA | 700 µA |
| Applications | -48V | -48V |
| Current - Output (Max) | - | - |
| Number of Channels | 1 | 1 |
| Internal Switch(s) | No | No |
| Programmable Features | Current Limit, Fault Timeout, Slew Rate | Current Limit, Fault Timeout, Slew Rate |
-
1. What is a PMIC hot-swap controller?
A hot-swap controller is a power management integrated circuit that allows circuit boards or modules to be safely plugged and unplugged while the device is running without causing damage to the device itself or the power system.
-
2. How to choose a suitable hot-swap controller?
When selecting a hot-swap controller, you should consider the system's current and voltage range, protection mechanisms (such as overcurrent protection and thermal shutdown), response time, power dissipation, and other required functions.
-
3. How do hot-swap controllers prevent inrush current?
Through internal current limiting circuits, hot-swap controllers control the rate of current increase at the moment of insertion to avoid damage to the system due to instantaneous inrush current. At the same time, the settable soft start function helps to load the voltage smoothly.
-
4. What voltage ranges do PMIC hot-swap controllers support?
Hot-swap controllers support voltage ranges from low voltage (such as 5V) to high voltage (such as 48V or even higher), depending on the model and application scenario of the controller.
