TVP00RF-19-88PC-P35AD vs TVP00RS-17-73SA-S15
| Part Number |
|
|
| Category | Circular Connectors | Circular Connectors |
| Manufacturer | Amphenol Aerospace Operations | Amphenol Aerospace Operations |
| Description | CONN RCPT MALE 88POS GOLD SLDR | CONN RCPT FMALE 73POS GOLD SLDR |
| Package | - | - |
| Series | MIL-DTL-38999 Series III, Tri-Start? HD | MIL-DTL-38999 Series III, Tri-Start? HD |
| Features | Alignment Disc, Shielded | Shielded |
| Mounting Type | Panel Mount, Flange; Through Hole | Panel Mount, Flange; Through Hole |
| Termination | Solder | Solder |
| Ingress Protection | Environment Resistant | - |
| Contact Finish | Gold | Gold |
| Orientation | C | A |
| Number of Positions | 88 | 73 |
| Connector Type | Receptacle, Male Pins | Receptacle, Female Sockets |
| Shell Size - Insert | 19-88 | 17-73 |
| Fastening Type | Threaded | Threaded |
| Shell Material, Finish | Aluminum, Nickel Plated, Electroless | Stainless Steel, Nickel Plated |
-
1. How to solder a circular connector
1. Remove the insulator, prepare the soldering iron and needle-nosed pliers or tweezers;
2. Place the blade of the soldering iron tip close to the solder joint, and keep the soldering iron at an angle of about 60° to the horizontal plane so that the molten tin can flow smoothly from the soldering iron tip to the solder joint. The time the soldering iron tip stays at the solder joint should be controlled to 1-2 seconds;
3. Make sure that the insulator is not burned, the tin on the solder joint is smooth, burr-free, and there is no cold solder joint, and the definition of the solder wire meets the requirements of the drawing. -
2. What is a circular connector
A circular connector is a cylindrical electronic connector with a circular mating surface. It belongs to the fifth category of the interconnection classification and is mainly used for interconnection between devices. The design of circular connectors includes many types, such as low-frequency circular connectors, RF coaxial connectors and audio connectors, etc., with a wide operating temperature range from -55℃ to +150℃.
-
3. How to remove a circular electrical connector
1. Loosen the locking ring. To remove a circular electrical connector, you first need to loosen the locking ring;
2. Remove the sealant. There is a sealant on the connector, which needs to be removed first.
3. Remove the terminal. First, loosen the terminal fastening or open the slot, and then carefully separate the plug and the socket; -
4. What is the definition of a connector?
Connector, that is, CONNECTOR. It is also called connector, plug and socket in China. Generally refers to an electrical connector. That is, a device that connects two active devices to transmit current or signals. Connectors are a component that our electronic engineering technicians often come into contact with.
